Onkyo HT-r591 instruction manual En-34, Turning On & Basic Operations

*1

*2

*3

*4

*5

*6

*7

Listening Mode			Description	Input	Speaker
				Source	Layout
Dolby Pro Logic IIz			Dolby Pro Logic IIz Height is designed to	S	B
Height			more effectively use existing program	D
			material when height channel speaker	F
	P L z	H e i g h t
			outputs are present. Dolby Pro Logic IIz
			Height can be used to upmix a variety of
			sources from movies and music, but are
			particularly well-suited to upmix game
			content.
Dolby EX			These modes expand 5.1-channel sources for	D	V
			6.1/7.1-channel playback. They’re especially	H
	D o l b y	E X
			suited to Dolby EX soundtracks that include
			a matrix-encoded surround back channel.
	D o l b y	D E X	The additional channel adds an extra
			dimension and provides an enveloping
			surround sound experience, perfect for
			rotating and fly-by sound effects.
Neo:6			This mode expands any 2-channel source for
			up to 7.1-channel playback. It uses seven
			full-bandwidth channels of matrix decoding
			for matrix-encoded material, providing a
			very natural and seamless surround sound
			experience that fully envelops the listener.
			• Neo:6 Cinema	S	XCN
	N e o : 6	C i n e m a
			Use this mode with any stereo movie (e.g.,
			TV, DVD, VHS).
	N e o : 6	M u s i c	• Neo:6 Music
			Use this mode with any stereo music source
			(e.g., CD, radio, cassette, TV, VHS, DVD).
			• Neo:6	D	V
	N e o : 6		This mode uses Neo:6 to expand 5.1-
			channel sources for 6.1/7.1-channel
			playback.

Turning On & Basic Operations

Note

These listening modes cannot be selected during USB or iPod playback.

Based on the audio channel signal contained in the source, the corresponding speakers will output the sound.

The AV receiver can input the DSD signal from HDMI IN. Setting the output setting on the player side to PCM might obtain a better sound according to the player. In that case, set the output setting on the player side to PCM.

For the Blu-ray Discs, Dolby Digital is used in a 3.1/5.1-channel speaker system. DTS is used depending on the configuration of the AV receiver.

If there are no surround back speakers, DTS is used.

If there are no surround back speakers, Dolby Pro Logic II is used.

• The listening modes cannot be selected with some source formats.

En-34