Connecting the MB-S1
Here is an explanation of how to connect the main components to the
•Be sure to always refer to the instructions that came with the component that you are connecting.
•Do not plug in the power cord until all connections have been made.
•For input jacks, red connectors (marked R) are used for the right channel, and white connectors (marked L) are used for the left channel.
•Do not bind audio/video connection cables with power cords and speaker cables. Doing so may adversely affect the picture and sound quality.
•When using the digital inputs, make sure to also connect the analog connections whenever possible.
•Insert all plugs and connectors securely. Improper connections can result in noise, poor performance, or damage to the equipment.
Improper connection
Inserted completely
•When using one of the optical input jacks, remove the protective cap and keep it safely. When the jack is not used, replace the protective cap.
•When using an optical input jack, always use an optical fiber cable.
Optical digital input terminal
An optical digital input terminal is equipped with a protection cap. When connecting, remove this cap. When not using, put the cap back on the terminal.
L L
R R
INPUT OUTPUT
ANALOG
DIGITAL | DIGITAL | |
INPUT | OUTPUT | |
|
| HARD DISK MUSIC LIBRARY |
1 | 2 | MODEL NO. |
OPTICAL | COAXIAL | OPTICAL |
REMOTE CONTROL
5
L | R | R | L | 6 |
|
|
|
| |
|
|
|
| cable |
|
|
|
| Coaxial |
Audio |
|
|
| digital cable |
connection |
|
|
|
|
cable |
|
|
|
|
Optical digital cable
: Signal flow
1 L | R L | R | 4 L | R | 2 |
3
Analog | Analog | terminall Analog output | Digital | Digital input |
output | input |
| output |
|
| Amplifier | Tuner, cassette tape | CD/DVD/MD | CD/MD recorder |
11