Onkyo MB-S1 Turning on the power, Switching the CD player and HDD, Opening the CD tray

Understanding the basic operations before using the MB-S1

ON button

STANDBY/ON button

STANDBY/ON								PLAY MODE	EDIT/CLEAR
ON								MULTI JOG	STOP	PLAY/	PAUSE
								YES	NO
STANDBY								MENU/EXIT	PLAY LIST
								PUSH TO ENTER
USB	DISPLAY	TEXT	CD DUBBING	FAVORITE IT	HDD REC	REC MODE	EXTERNAL INPUT	OPERATION
								C D	HDD
									HARD DISK MUSIC LIBRARY MB-S1

(open/close) button OPERATION buttons

STANDBY button

OPERATION buttons

Turning on the power

Press the STANDBY/ON button on the MB-S1 to turn on the power. Pressing it again causes the MB-S1 to enter the standby state. When using the remote controller, pressing the ON button turns on the power and pressing the STANDBY button causes the MB-S1 to enter the standby state.

STANDBY / ON	STANDBY / ON	Remote controller
ON	ON

STANDBYSTANDBY

Switching the CD player and HDD

The MB-S1 can play the tracks on an audio CD or a CD-ROM containing music files as well as the tracks recorded on the hard disk drive (HDD). To switch the playing source, use the OPERATION buttons.

Pressing the CD button activates the CD player, and the MB-S1

enters the CD mode. The CD, STOP, and PLAY/ PAUSE indicators light in orange. In the CD mode, you can play audio CDs and CD-ROM discs using the buttons on the MB-S1 or remote controller.

Remote controller

OPERATION

C DHDD

Standby state: The state that the current time is displayed in the

display area. If you have not set the current time, “-- : --” is displayed (see the next page).

Power-on state: The state that the STANDBY/ON button on the MB-S1 or the ON button on the remote controller is pressed during the standby state. In the power-on state, you can operate the MB- S1. After pressing the button, “HDD MUSIC LIBRARY” indication scrolls in the display area. Then, the number of groups and the total recorded time for tracks on the HDD is displayed, and the same mode indicators lights as when the MB-S1 turned on last time. When the CD mode is active, “Reading Media” is displayed in the display area and loading CD starts. After the CD loading process has finished, the number of groups and tracks, and the total recorded time for the CD.

When the HDD section is activated, the same group indication lights as when the MB-S1 turned on last time.

Pressing the HDD button activates the HDD section, and the MB- S1 enters the HDD mode. The HDD, STOP, and

PLAY/ PAUSE indicators light in green. In the HDD mode, you can play the music files recorded on the internal HDD.

OPERATION Remote controller

C DHDD

Opening the CD tray

Press (open/close) button on the MB-S1 to open the CD tray.

Note:

For few seconds immediately after the power is turned on, pressing any button will do nothing. Remember to operate the MB-S1 after the loaded information is displayed.

17