Using timer functions

6.Set the start time and end time for the timer setting.

MULTI JOG

10. Select a play list.

(Only when you select “HDD PLAY” for timer function in step 4)

MULTI JOG

PUSH TO ENTER

MULTI JOG

PUSH TO ENTER

• Turn the jog dial to select hour for the start

time. Press the jog dial to confirm the hour

and the highlight moves to the minute.

• After setting the start time for the timer

setting, the time one hour passed from the

start time appears as the end time.

• Use the

/

button move the

highlight forward or back.

 

• The maximum time from the start time to

the end time is 23 hours 59 minutes 59

PUSH TO ENTER

MULTI JOG

PUSH TO ENTER

Turn the jog dial to select a play list and press it to confirm the selection.

If you have not created any play list, “Current” appears and the last group which was played before the timer activated will be played when the start time comes.

After pressing the jog dial, the timer setting finishes and is enabled.

seconds.

11. Select a target group for recording.

(Only when you select “D-1 REC,” “D-2 REC,” or “ANA REC.”)

7. Confirm the start time and the end time.

PLAY MODE

Press the YES button to confirm the time. Then

 

the display changes to the indication of setting

YES

the day of the week. At first, current day of the

week blinks.

 

 

 

 

 

 

 

8. Set the day of the week.

MULTI JOG

PUSH TO ENTER

MULTI JOG

PUSH TO ENTER

Notes:

Turn the jog dial to select a target group for recording and press it to confirm the selection. You can choose from “Current,” “New,” or “Fix.”

Current: Set a target group to the group the last time the recording or playback was performed.

New: Create a new target group.

Fix: Select a target group from the existing groups. Turn the jog dial to select a target group for recording and press it to confirm the selection.

MULTI JOG

Use the / button to select the day of the week for activating the timer setting and press the jog dial.

• When you record longer hours, the recording will be separated

automatically into a track every one hour.

• If an operation is performed such as playing, recording and

others when the start time for the timer setting comes, the timer

function may not operate normally.

• The timer function will activate whether the MB-S1 is turned on

or in the standby state.

• You can set up to 4 timer settings. However, when a timer

PUSH TO ENTER

9. Confirm the day of the week.

PLAY MODE Press the YES button to confirm the day of the week.

YES

In step 4 above:

When you select “HDD PLAY,” go to step 10, “Select a play list.”

When you select “D-1 REC,” “D-2 REC,” or “ANA REC,” go to the step 11, “Select a target group for recording.”

setting already executed has not completed yet and the start time

for another timer setting comes, the latter timer setting will be

ignored.

42

Page 43
Image 43
Onkyo MB-S1 Using timer functions, Set the start time and end time for the timer setting, Set the day of the week