Onkyo TX-NR5009 Remote Controller Setup, Firmware Update, Remote Mode Setup, Activities Setup

■Proxy URL

To use a Web proxy, enter its URL here.

■Proxy Port

If you’re using a Web proxy, enter a proxy port number here.

■Network Control

`Enable

`Disable

This setting enables or disables control over the network.

Note

•When set to “Enable”, the NET indicator is dimly-lit and the power consumption slightly increases in standby mode.

■Control Port

`“49152” to “65535”

This is the network port used for control over the network.

Note

•When the “Network Control” setting is set to “Disable”, this setting is cannot be selected.

Firmware Update

See “Firmware Update” for the update procedure

(➔ page 91).

Note

•Perform the firmware update only when such an announcement is posted on the Onkyo web site. Visit the Onkyo web site for the latest information.

•It takes maximum 60 minutes to complete the firmware update.

■Version

Displays the current version of the firmware.

■Receiver

`via NET:

Performs the firmware update via Internet. Check the network connection before updating.

`via USB:

Performs the firmware update from a USB device. These settings allow you to update the AV receiver’s firmware. Do not shutdown the power of the AV receiver while updating.

■Universal Port

`via NET:

Performs the firmware update via Internet. Check the network connection before updating.

`via USB:

Performs the firmware update from a USB device. These settings allow you to update Onkyo dock’s firmware. Do not shutdown the power of the AV receiver while updating.

Note

•This update shall not be performed when no dock is connected to the UNIVERSAL PORT jack.

Remote Controller Setup

Main menu Remote Controller Setup

Remote Mode Setup

See “Looking up for Remote Control Code” (➔ page 79).

Activities Setup

Via onscreen menu, you can specify what actions will be taken by the Easy macro command in the Easy macro mode (➔ page 46).

First, select the ACTIVITIES (MY MOVIE, MY TV, or MY MUSIC) that you want to configure.

■Source

`BD/DVD, VCR/DVR, CBL/SAT, GAME, PC, AUX, TUNER, TV/CD, PHONO, PORT, NET,

USB

With this setting, you can choose the target input source of the Easy macro.

■TV Power On

`Enable

`Disable

With this setting, you can specify whether or not to turn on your TV.

■Source Power On

`Enable

`Disable

With this setting, you can specify whether or not to turn on the source component.

■Receiver Power On

`Enable

`Disable

With this setting, you can specify whether or not to turn on the AV receiver.

■Receiver Source Change

`Enable

`Disable

With this setting, you can specify whether or not to change the input source.

■Source Play

`Enable

`Disable

With this setting, you can specify whether or not to start playback.

En

68