Onkyo TX-NR626 instruction manual En-54, Hdmi Input, Component Video Input, ` IN1

HDMI Input

If you connect a video component to an HDMI input, you must assign that input to an input selector. For example, if you connect your Blu-ray Disc/DVD player to HDMI IN 1, you must assign “HDMI1/MHL” to the “BD/DVD” input selector.

If you’ve connected your TV to the AV receiver with an HDMI cable, composite video and component video sources can be upconverted* and output by the HDMI output. You can set this for each input selector by selecting the “- - - - -” option. See “The video and audio signal flow” for more information on video signal flow and upconversion (➔ page 17).

Composite video,
component video	HDMI
	IN
	OUT
Composite video,	HDMI
component video

Here are the default assignments.

Input selector	Default assignment
BD/DVD	HDMI2
CBL/SAT	HDMI3
GAME	HDMI4
PC	HDMI5
AUX	HDMI1/MHL
TV/CD	- - - - -
PHONO	- - - - -

■BD/DVD, CBL/SAT, GAME, PC, AUX, TV/CD,

PHONO

`HDMI1/MHL, HDMI2, HDMI3, HDMI4, HDMI5, HDMI6:

Select the input to which the component has been connected.

`- - - - -:

Output composite video and component video sources from the HDMI output. The video output signal from the HDMI output is the one configured in “Component Video Input”.

Each HDMI input cannot be assigned to two input selectors or more. When HDMI1 - HDMI6 have already been assigned, you must first set any unused input selectors to “- - - - -” or you will be unable to assign HDMI1 - HDMI6 to other input selectors.

Note

•If no video component is connected to the HDMI input (even if the HDMI input is assigned), the AV receiver selects the video source based on the setting of “Component Video Input”.

•When an HDMI IN is assigned to an input selector as explained here, the same HDMI IN will be set as a priority in the “Digital Audio Input”. In this case, if you want to use the coaxial or optical audio input, make the appropriate selection in the “Audio Selector” setting (➔ page 62).

•Do not assign an HDMI IN to the TV/CD selector while

“HDMI CEC (RIHD)” is set to “On” (➔ page 64), otherwise appropriate CEC (Consumer Electronics Control) operation will not be guaranteed.

•If you assign “- - - - -” to an input selector that is currently selected in “HDMI Through” (➔ page 65), the “HDMI Through” setting will be automatically switched to “Off”.

•In order for the AV receiver to upconvert component input to HDMI output, the source output must be set to 480i/576i. When signal is input at resolution of 480p/576p and more, error message will be displayed.

Advanced Operations

Component Video Input

If you connect a video component to a component video input, you must assign that input to an input selector. For example, if you connect your Blu-ray Disc/DVD player to COMPONENT VIDEO IN, you must assign “IN1” to the “BD/DVD” input selector. Here are the default assignments.

Input selector	Default assignment
BD/DVD	- - - - -
CBL/SAT	IN1
GAME	- - - - -
PC	- - - - -
AUX	- - - - -
TV/CD	- - - - -
PHONO	- - - - -

■BD/DVD, CBL/SAT, GAME, PC, AUX, TV/CD,

PHONO

`IN1:

Select the input to which the component has been connected.

`- - - - -:

Output composite video sources from the HDMI output.

Note

•When composite video and component video sources are upconverted for HDMI OUT SUB, only signals with a resolution of 480i/576i are output and the resolution remains the same. If your TV doesn’t support this resolution, there will be no picture (➔ page 84).

En-54

Operating procedure (➔ page 52)