Using the Home Menu
The Home menu provides quick access to frequently used menus.
Tip
•The
1 Press RECEIVER followed by HOME.
The Home menu will be superimposed on the TV screen.
Tip
• Alternatively, you can use HOME on the AV receiver.
2 Use e/ror q/wand ENTER to make the desired selection.
Press HOME to close the menu.
■Setup
`With this selection, you can access the common settings of the
Press ENTER to display the Setup menu (➔ page 52).
Tip
•You can also access frequently used settings from Quick Setup (➔ page 48).
■InstaPrevue
`With this selection, you can preview audio/video streams coming from HDMI inputs (HDMI
IN 1/2/3/4/5). Even with multiple components
connected through HDMI, you can easily switch between inputs as their previews are displayed on a single screen.
Press ENTER to display the main preview (currently selected HDMI input) and the additional previews (other HDMI inputs). Using q/wor e/rto select a preview thumbnail and pressing ENTER will switch the AV receiver to that input source.
Tip
•If no video signals are present, the thumbnails will be filled in black.
•You can specify the number of preview thumbnails as well as their positioning on screen (➔ page 66).
Note
•This function cannot be selected when:
–HDMI IN 6 is the current HDMI input source, or
–No signal is present on the current input source.
•Depending on video signals, the picture may not be properly rendered on the preview thumbnails of InstaPrevue.
■Firmware Update
`With this selection, you can update the firmware of the AV receiver. Note that this selection will be grayed out for a short while after the AV receiver is turned on. Please wait until it becomes operable.
Press ENTER to start the procedure (➔ page 85).
■Network Service
You need to connect the AV receiver to your home network (➔ page 16, 27).
`With this selection, you can use various Internet radio services or play the contents stored in media connected to your home network (➔ pages 32 to 36). Note that this selection will be grayed out for
Playback
a short while after the AV receiver is turned on. Please wait until it becomes operable.
Press ENTER to display the network service screen. If you want to use the Internet radio services, use q/w/e/rto select the desired service. Pressing ENTER again switches to that selection. If you want to play music files on a computer or media server, use q/w/e/rto select “DLNA” and then press ENTER. If you want to play music files on a computer or NAS (Network Attached Storage), use q/w/e/rto select “Home Media” and then press ENTER.
■USB
`With this selection, you can play contents of portable players and USB storage devices connected to the AV receiver’s USB port (➔ page 32). Note that this selection will be grayed out for a short while after the AV receiver is turned on. Please wait until it becomes operable.
Press ENTER to select a drive or browse the contents of the media connected, followed by q/wto select the desired folder or track.
Pressing ENTER as a track is selected will start playback.
