Setting the Display Brightness
You can adjust the brightness of the AV receiver’s display.
1 Press RECEIVER once followed by DIMMER repeatedly to switch between: normal, dim, or dimmer brightness.
Tip
•(North American and Taiwanese models) Alternatively, you can use DIMMER on the AV receiver.
Changing the Input Display
When you connect an
This setting can be done only from the front panel.
1 Press TV/CD or GAME.
“TV/CD” or “GAME” appears on the AV receiver’s display.
2 Press and hold down the same button (about
3 seconds) to change the input display.
Repeat this step to select the desired input
display. |
|
|
|
■ TV/CD: | TV/CD → DOCK | ||
| → |
|
|
|
| TAPE | |
|
| → | |
■ GAME: | GAME ↔ DOCK | ||
“
Note
•“DOCK” can be selected for the “TV/CD” or “GAME” input selector, but not at the same time.
•Enter the appropriate remote control code before using the remote controller for the first time (➔ page 72).
Playback
Muting the AV Receiver
You can temporarily mute the output of the AV receiver.
1 Press RECEIVER followed by MUTING.
The output is muted and the MUTING indicator flashes on the AV receiver’s display.
Tip
•To unmute, press MUTING again or adjust the volume.
•Muting is automatically cancelled when the AV receiver is set to standby.
