Onkyo TX-NR626 Specifications, En-92, Amplifier Section, Video Section, Tuner Section, Appendix

Models: TX-NR626

1 140
Download 140 pages 37.38 Kb
Page 92
Image 92
Specifications

Specifications

Amplifier Section

Rated Output Power

All channels: 95 watts minimum continuous power per channel, 8 ohm loads, 2 channels driven from 20 Hz to 20 kHz, with a maximum total harmonic distortion of 0.08% (FTC)

115 watts minimum continuous power per channel, 6 ohm loads, 2 channels driven at 1 kHz, with a maximum total harmonic distortion of 0.7% (FTC)

(North American)

7 ch × 160 W at 6 ohms, 1 kHz, 1 ch driven of 1% (IEC)

(Others)

Maximum Effective Output Power

7 ch × 175 W at 6 ohms, 1 kHz, 1 ch driven (JEITA)

(Asian)

Dynamic Power*

*IEC60268-Short-term maximum output power

240 W (3 , Front)

210 W (4 , Front)

120 W (8 , Front)

THD+N (Total Harmonic Distortion+Noise)

 

0.08% (20 Hz - 20 kHz, half power)

Damping Factor

60 (Front, 1 kHz, 8 )

Input Sensitivity and Impedance (Unbalance) 200 mV/47 k(LINE)

2.5mV/47 k(PHONO MM)

Rated RCA Output Level and Impedance

200 mV/2.2 k(LINE OUT)

Maximum RCA Output Level and Impedance 2 V/2.2 k(LINE OUT)

Phono Overload

70 mV (MM 1 kHz 0.5% Direct)

Frequency Response 5 Hz - 100 kHz/+1 dB, –3 dB (Direct mode)

Tone Control Characteristics

±10 dB, 30 Hz (BASS) ±10 dB, 20 kHz (TREBLE)

Signal to Noise Ratio 106 dB (LINE, IHF-A)

80 dB (PHONO MM, IHF-A)

Speaker Impedance 6

- 16

(North American and Taiwanese)

4

- 16

(Others)

Video Section

Input Sensitivity/Output Level and Impedance

1 Vp-p/75 (Component Y)

0.7Vp-p/75 (Component PB/CB,

PR/CR)

1 Vp-p/75 (Composite)

Component Video Frequency Response

5 Hz - 100 MHz/+0 dB, –3 dB

Tuner Section

FM Tuning Frequency Range

87.5 MHz - 107.9 MHz

(North American and Taiwanese)

87.5MHz - 108.0 MHz, RDS (Others) AM Tuning Frequency Range

 

522/530 kHz - 1611/1710 kHz

Preset Channel

40

Network Section

 

 

Ethernet LAN

10BASE-T/100BASE-TX

Wireless LAN

Compatible standards:

 

IEEE 802.11 b/g/n standard (Wi-Fi®

 

standard)

Security:

WEP 64 bit, WEP 128 bit, WPA/WPA2-

 

PSK (AES), WPA/WPA2-PSK (TKIP)

Transmission frequency

 

1 - 11 ch (North American and

 

Taiwanese)

 

10 - 13 ch (France)

 

1 - 13 ch (Others)

 

(Wi-Fi®standard)

Radio frequency

2.4 GHz

En-92

Appendix

Bluetooth Section

Communication system

 

Bluetooth Specification version 2.1 +

 

EDR (Enhanced Data Rate)

Maximum communication range

 

Line of sight approx. 15 m*1

Frequency band

2.4 GHz band (2.4000 GHz -

 

2.4835 GHz)

Modulation method

FHSS (Freq Hopping Spread Spectrum)

Compatible Bluetooth profiles

 

A2DP 1.2 (Advanced Audio Distribution

 

Profile)

 

AVRCP 1.3 (Audio Video Remote

 

Control Profile)

Supported Codecs

SBC

Transmission range (A2DP)

20 Hz - 20,000 Hz (Sampling frequency

44.1 kHz)

*1 The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, cordless phone, reception sensitivity, antenna’s performance, operating system, software application, etc.

Page 92
Image 92
Onkyo TX-NR626 Specifications, En-92, Amplifier Section, Video Section, Tuner Section, Network Section, Bluetooth Section