IntelliVolume
■IntelliVolume
`
With IntelliVolume, you can set the input level for each input selector individually. This is useful if one of your source components is louder or quieter than the others.
Use e/rto set the level.
If a component is noticeably louder than the others, use eto reduce its input level. If it’s noticeably quieter, use rto increase its input level.
Note
• IntelliVolume does not work for Zone 2.
A/V Sync
■A/V Sync
`0msec to 800msec in 10 msec steps
When using progressive scanning on your
Press ENTER to view the TV picture while setting the delay when the video source is output to HDMI OUT MAIN.
To return to the previous screen, press RETURN.
The range of values you can adjust will depend on whether your TV or display supports HDMI Lip Sync and if the “Lip Sync” setting is set to “On” or not
(➔ page 66).
Note
•This setting is not available in either of the following cases:
–The “Audio TV Out (Main)” setting is set to “On”
(➔ page 65) or “Audio TV Out (Sub)” setting is set to “On” (➔ page 65) and you’re listening through your TV speakers.
–“HDMI CEC (RIHD)” is set to “On” (➔ page 64) and you’re listening through your TV speakers.
•A/V Sync is disabled when the Pure Audio (European, Australian and Asian models) or Direct listening mode is used with an analog input source.
•This setting cannot be used with the NET, USB and BLUETOOTH input selectors.
Name Edit
You can enter a custom name for each individual input selector and radio preset for easy identification. When entered, the custom name will appear on the display.
The custom name is edited using the keyboard screen.
■Name
1 Use q/w/e/rto select a character, and then press ENTER.
Repeat this step to enter up to 10 characters.
2 To store a name when you’re done, be sure to select “OK” by using q/w/e/r, and then press
ENTER.
Advanced Operations
Name input area
|
|
|
|
|
|
|
|
| 4 - 4. Name Edit |
|
| ||
|
| BD/DVD |
| |||
|
| Name |
|
| ||
|
|
|
|
|
|
|
|
|
| a | b |
| c | d | e | f | g | h | i | j |
| k |
|
| l | m | ||||
|
|
| n | o |
| p | q | r | s | t | u | v | w |
| x |
| y | z | |||||
|
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 |
| – | ^ | \ |
|
| ||||||
|
| , | . | / | ; | : | @ | [ | ] |
|
|
| Space |
|
|
| |||||||
|
|
|
|
|
|
| |||||||||||||||||
|
|
|
|
| Shift |
|
|
|
| Back Space |
|
|
| OK |
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
+10 | Shift |
|
|
|
|
|
|
|
|
|
|
|
|
|
| CLR | All Erase | ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||
|
|
| A B C D E | F G H | I | J |
| K |
| L M | |||||||||||||
|
|
| N O P Q R S T U V W X Y Z | ||||||||||||||||||||
|
| ! | ˝ | # | $ | % | & | ’ | ( | ) | _ | = |
|
| ˜ |
|
| ||||||
|
| < | > | ? | + |
| ` | { | } |
|
|
| Space |
|
|
| |||||||
|
|
|
|
|
|
|
| ||||||||||||||||
|
|
|
|
| Shift |
|
|
|
| Back Space |
|
|
| OK |
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
+10 | Shift |
|
|
|
|
|
|
|
|
|
|
|
|
|
| CLR | All Erase |
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||
*1 |
| a |
|
| b |
| c d *2 |
| e | ||||||||||||||
aToggles between lower and upper case characters.*1
bMoves the cursor left or right in the Name input area.
cMoves the cursor backward and deletes one character.*2
dEnters a space character.
eConfirms your entry.
Tip
•To name a radio preset, use TUNER to select AM or FM, and then select the preset (➔ page 38).
•To restore a name to its default, erase all characters with CLR, select “OK” and then press ENTER.
*1 This can also be performed by using +10 on the remote controller.
*2 Press CLR on the remote controller to delete all the characters you have input.
Note
•This setting cannot be used for the NET, USB and BLUETOOTH input selectors.
En-60
Operating procedure (➔ page 52)
