iPod/iPhone Playback via Onkyo Dock
Using the Onkyo Dock
Dock is sold separately. Models sold are different depending on the region.
For the latest information on the Onkyo Dock components, see the Onkyo web site at: http://www.onkyo.com
Before using the Onkyo Dock components, update your iPod/iPhone with the latest software, available from the Apple web site.
For supported iPod/iPhone models, see the instruction manual of the Onkyo Dock.
RI Dock
With the RI Dock, you can easily play the music stored on your Apple iPod/iPhone through the AV receiver and enjoy great sound, and watch iPod/iPhone slideshows and videos on your TV. In addition, the onscreen display (OSD) allows you to view, navigate, and select your iPod/iPhone model’s contents on your TV, and with the supplied remote controller, you can control your iPod/iPhone from the comfort of your sofa. You can even use the AV receiver’s remote controller to operate your iPod/iPhone.
Note
•Enter the appropriate remote control code before using the AV receiver’s remote controller for the first time (➔ page 40).
•Connect the RI Dock to the AV receiver with an ucable (➔ page 15).
•Set the RI Dock’s RI MODE switch to “HDD” or “HDD/DOCK”.
•Set the AV receiver’s Input Display to “DOCK” (➔ page 27).
■System Function System On
When you turn on the AV receiver, RI Dock and iPod/iPhone turn on automatically. In addition, when RI Dock and iPod/iPhone are on, the AV receiver can be turned on by pressing 8.
Auto Power On
If you press the remote controller’s 1(Playback) while the AV receiver is on Standby, the AV receiver will automatically turn on, select your iPod/iPhone as the input source, and your iPod/iPhone will start playback.
Direct Change
If you start iPod/iPhone playback while listening to another input source, the AV receiver will automatically switch to the input to which RI Dock is connected.
Other Remote Controllers
You can use the remote controller that came with the AV receiver to control other iPod/iPhone functions. The available functionality depends on the AV receiver.
En
iPod/iPhone Alarm
If you use the Alarm function on your iPod/iPhone to start playback, the AV receiver will turn on at the specified time and select your iPod/iPhone as the input source automatically.
Note
•Linked operations do not work with video playback or when the alarm is set to play a sound.
•If you use your iPod/iPhone with any other accessories, iPod/iPhone playback detection may not work.
■Operating Notes
•Use the AV receiver’s volume control to adjust the playback volume.
•While your iPod/iPhone is inserted in RI Dock, its volume control has no effect.
•If you do adjust the volume control on your iPod/iPhone while it’s inserted in RI Dock, be careful that it’s not set too loud before you reconnect your earphones.
Note
•On the iPod with video and iPod nano (1st generation), the click wheel is disabled during playback.
Controlling Your iPod/iPhone
By pressing REMOTE MODE that’s been programmed with the remote control code for your Dock, you can control your iPod/iPhone in the Dock with the following buttons.
See “Remote Control Codes for Onkyo Components Connected via u” for details on entering a remote control code (➔ page 40).
See to the Dock’s instruction manual for more information.
■RI Dock
•Set the RI Dock’s RI MODE switch to “HDD” or “HDD/DOCK”.
•8may not work with a remote control code (without u). In this case, make an uconnection and enter a remote control code 81993 (with u).
With the RI Control
In this case, make an uconnection and enter a remote control code 81993 (with u).
•Set the AV receiver’s Input Display to “DOCK” (➔ page 27).
Without the RI Control
You must enter a remote control code 82990 first (➔ page 40).
38
