MGW 2000e Quick Start Guide
Getting Started
This section describes how to unpack and initialize MGW 2000e. It instructs you on encoding and transmitting a UDP stream under default conditions by using one encoding module and MGW 2000e Director.
For instructions on encoding and transmitting RTP streams, refer to the user manual.
Unpacking MGW 2000e
1.Choose a dry location for MGW 2000e, which complies with the requirements regarding temperature specified in the user manual.
2.Unpack MGW 2000e and its components carefully and make sure that you have all the required components available.
3.
Power Supply
MGW 2000e operates at 90/260V AC. The power cord connects to the power connector on MGW 2000e’s rear panel. MGW 2000e recognizes your local voltage automatically.
MGW 2000e does not ship with a power cord. You will have to purchase a power cord that fits your local DIN socket.
3
