Optibase MGW 2000e quick start Configuring Source Parameters

MGW 2000e Quick Start Guide

Configuring Source Parameters

1.Click the Source tab; the Source page appears.

2.Under Video Input, choose the video source connected to the relevant encoding module and click Apply.

3.If you use an analog audio source, set Audio Input to Unbalanced and click Apply.

If you have an MGE-200D encoding module installed and use a digital audio source, set Audio Input to Digital Audio and click Apply.

4.The other parameters are pre-set to default values and don’t have to be adjusted. For detailed instructions and explanations on setting other parameters, refer to the user manual.

5.To return to the Channels list, click Channels in MGW 2000e Director's menu.

For a detailed description of the source parameters, refer to the user manual.

Note

If you want to choose SDI as video input, you have to encode from a digital video source and install an MGE-200D encoding module. For instructions on installing encoding modules and connecting peripherals, refer to the user manual.

12