CLOCK MODE

The time, date (including the day of the week) and time alarm can be set while the watch is in CLOCK Mode. Follow the instructions below to set or activate the time, date, zone time, metric or imperial standards, alarm time, stopwatch and timer.

SET CLOCK AND MEASUREMENT UNITS:

Diagram

Instructions

 

1.Press MODE to display the CLOCK mode.

 

2.Press and hold FUNC/SET for 2 seconds. “24h” will flash

 

on the display.

 

3.Press ST/SP/- to change from 24 hour to 12 hour time

 

display.

 

4.Press FUNC/SET again. The hour will flash. Press SE-

 

LECT/+ to move the value up, or ST/SP/- to move the

 

value down.

 

Tip: Continuouslypressandholdabuttontofast-change

 

the value.

 

5.Repeat Steps 3 – 4 to change the rest of the settings, in

 

this order: minutes, year, month/date or date/month

 

display, month, day, time zone (+/- 23 hours), tempera-

 

ture display (° C / ° F), measurement units (feet / meters),

 

and barometric pressure units (inHg or hPa).

NOTE You cannot change these settings while in TOUR Mode. If you attempt to do so, TRIP will show on the display. Refer to the TOUR Mode section (➔ 14).

GB

SET THE ALARM

Diagram

Instructions

 

1.

Press MODE to display the CLOCK mode.

 

2.

Press SELECT/+ 3 times to move it into the alarm

 

 

setting screen.

3.Press ST/SP/- to activate or deactivate the alarm. A small bell icon will appear on the left side of the alarm time when it is activated.

4.Press and holdFUNC/SET for 2 seconds, to set the alarm hour and minutes. Use the SELECT/+ or ST/ SP/- buttons to change the value. (The alarm will be automatically activated once the alarm time is set).

STOPWATCH

The Stopwatch works in CLOCK, ALTI-BARO, CARDIO, and BIKE modes. From any of these modes, press SELECT/+ to display the stopwatch. Then,

• Press ST/SP/- to start, pause, and stop the stopwatch.

With the stopwatch stopped, press and hold FUNC/SET to reset.

NOTE You can switch to other modes while running the stop- watch in the background.

9

Page 9
Image 9
Oregon Scientific RX109 Clock Mode, Stopwatch, SET Clock and Measurement Units, SET the Alarm, Diagram Instructions