TG3651BX(e).book Page 12 Monday, May 31, 2010 8:51 AM
Preparation
Battery level
Battery icon | Battery level |
1 | High |
2 | Medium |
3 | Low |
| L Needs to be charged. |
4 | Empty |
Note:
L The batteries need to be charged if:
–“Recharge battery” or 4displays on the handset display.
–the handset beeps intermittently while it is in use.
Panasonic
Operation | Operating time |
In continuous use | 5 hours max. |
Not in use (standby) | 150 hours max. |
Note:
L Actual battery performance depends on a combination of how often the handset is in use and how often it is not in use (standby).
L Even after the handset is fully charged, the handset can be left on the charger without any ill effect on the batteries.
LThe battery level may not be displayed correctly after you replace the batteries. In this case, place the handset on the charger and let it charge for at least 6 hours.
Setting up the unit before use
Symbol meaning:
Symbol | Meaning |
= | Perform with the base unit. |
Y | Perform with the handset. |
Example: | Press {<} or {>} to select |
{<}/{>}: “Off” | the words in quotations. |
Example: | Press {V} or {^} to select |
{V}/{^}: | the desired phone number |
| or entry. |
|
|
Dialing mode
If you cannot make calls, change this setting according to your telephone line service. The default setting is “Tone”.
“Tone”: For tone dial service.
“Pulse”: For rotary/pulse dial service.
YHandset
1!i{#}{0}{7}{9}
2{<}/{>}: Select the desired setting.
3Ii{i}
Date and time
YHandset
1!i{#}{0}{0}{1}
21 Enter the current date and month by selecting 2 digits for each.
2 Enter the current year by selecting 4 digits. Example: 8 December, 2010
{0}{8} {1}{2} {2}{0}{1}{0}
3Enter the current hour and minute
{2}{1} {3}{0}
4Ii{i}
Note:
LTo correct a digit, press {<} or {>} to move the cursor to the digit, then make the correction.
L The time shows on the base unit display.
12
