TG3651BX(e).book Page 14 Monday, May 31, 2010 8:51 AM
Making/Answering Calls
Making calls
Using the base unit =
1Dial the phone number.
L To correct a digit, press {CLEAR}.
2Lift the corded handset.
3When you finish talking, place the corded handset on the cradle.
Note:
L You can also dial the phone number after lifting the corded handset.
Using the speakerphone
1Dial the phone number, and press {SP- PHONE}.
2When the other party answers, speak into the microphone.
L Speak alternately with the other party.
3When you finish talking, press
Note:
L You can also dial the phone number after pressing
LFor best performance, use the speakerphone in a quiet environment.
L To switch to the receiver, lift the corded handset.
Redialing the number without hanging up Press {REDIAL} if the other party’s line is busy.
Using the handset Y
1Lift the handset and dial the phone number. L To correct a digit, press {CLEAR}.
2{C}
3When you finish talking, press {i} or place the handset on the charger.
Using the speakerphone
1Dial the phone number, and press {s}. L Speak alternately with the other party.
2When you finish talking, press {i}.
Note:
LFor best performance, use the speakerphone in a quiet environment.
L To switch to the receiver, press {C}.
Adjusting the receiver or speaker volume
=Base unit / YHandset
Press {^} or {V} repeatedly while talking.
Making a call using the redial list
The last 10 phone numbers dialed are stored in the redial list in each unit (each 24 digits max.).
=Base unit
1{REDIAL}
2{V}/{^}: Select the desired phone number.
3Lift the corded handset.
YHandset
1{<} REDIAL
2{V}/{^}: Select the desired phone number.
3{C}
Erasing a number in the redial list
=Base unit
1{REDIAL}
2{V}/{^}: Select the desired phone number.
3{CLEAR} i{EXIT}
YHandset
1{<} REDIAL
2{V}/{^}: Select the desired phone number.
3{CLEAR} i{*} i{i}
Storing a number to the phonebook
YHandset
1{<} REDIAL
2{V}/{^}: Select the desired phone number. iI
3To store the name, continue from step 2, “Adding entries”, page 18.
14
