TG3651BX(e).book Page 33 Monday, May 31, 2010 8:51 AM
| Useful Information |
|
|
Liquid damage |
|
|
|
Problem | Cause/solution |
Liquid or other form of | L Disconnect the AC adaptor and telephone line cord from the base |
moisture has entered the | unit. Remove the batteries from the handset and leave to dry for at |
handset/base unit. | least 3 days. After the handset/base unit are completely dry, |
| reconnect the AC adaptor and telephone line cord. Insert the |
| batteries and charge fully before use. If the unit does not work |
| properly, contact an authorized service center. |
Caution:
L To avoid permanent damage, do not use a microwave oven to speed up the drying process.
Registering a handset to a base unit
The supplied handset and base unit are
1Base unit:
Press and hold {LOCATOR} for about 5 seconds until Lflashes.
L If the registered handset starts ringing, press the same button to stop. Then repeat this step. L The next step must be completed within 3 minutes.
2Handset:
!i{#}{1}{2}{3} iM
3Press {2} to select “Register HS”.
L A long beep sounds from the handset. L Ldisappears from the base unit.
Deregistering a handset
A handset can cancel its own registration that is stored in the base unit. This allows the handset to end its wireless connection with the system.
Important:
L If you do not use the handset after canceling registration, remove the batteries.
L If you cancel the handset registration of the extension number 1, the date and time are not backed up during a power failure.
1!i{#}{1}{2}{3} iM
2Press {1} to select “Cancel HS”.
3Select the handset you want to cancel by pressing the desired handset number.
4Remove the batteries from the deregistered handset.
33
