Caller ID Service

25
Using Caller ID service
Important:
LThis unit is Caller ID compatible. To use Caller
ID features, you must subscribe to Caller ID
service. Contact your service provider/
telephone company for details.

Caller ID features

When an outside call is being received, the caller’s
phone number is displayed.
Caller information for the last 30 callers is logged in
the caller list from the most recent call to the
oldest.
LIf the unit cannot receive caller information, the
following will be displayed:
–“Out of area”: The caller dials from an
area which does not provide Caller ID service.
–“Private caller”: The caller requests not
to send caller information.
Please contact your service provider/telephone
company for details and availability of this
service in your area.
LIf you do not subscribe to Caller ID service,
“Incoming call” is displayed while a call is
being received on the handset display.
LIf the unit is connected to a PBX system, caller
information may not be received properly.
Contact your PBX supplier.
LIf the name display service is available in your
area, the display shows caller names. For
further information, please contact your service
provider/telephone company.
Missed calls
If a call is not answered, the unit treats the call as
a missed call:
– the number of missed calls is shown on the
display.
–\ flashes slowly on the base unit display.
This lets you know if you should view the caller list
to see who called while you were away.
LIf the missed calls have already been viewed by
the base unit or handsets, the missed call
indication is cleared on the all units.
Phonebook name display
When caller information is received and it matches
a phone number stored in the phonebook, the
stored name in the phonebook is displayed and
logged in the caller list.

Group ringer tone for handset

phonebook

This feature can help you identify who is calling by
using different ringer tones for different groups of
callers. When adding an entry to the phonebook,
you can assign it to the desired group (page 18).
When a call is received from a caller assigned to a
group, the group’s ringer you selected rings after
the caller information is displayed.
If you select “Default”, the handset uses the
ringer tone you selected on page 15 when a call
from this group is received.
LThe ringer may be changed after the 2nd ring.
1! i {#}{1}{3}{5}
2Press {1} to {9} to select the desired group.
LYou can also select the desired group by
pressing {<} or {>}.
3M
4{<}/{>}: Select the desired setting.
5M
LIf you selected “Default”, press {i}.
6To select the desired tone, press {1} to {5}.
To select the desired melody, press {1} to {4}.
LYou can also select the desired setting by
pressing {<} or {>}.
7I i {i}
= Base unit / Y Handset
= Base unit / Y Handset
Y Handset
Y Handset
TG3651BX(e).book Page 25 Monday, May 31, 2010 8:51 AM