Integra DTR-10.5 110, Dolby Pro Logic IIx/DTS NEO6 2ch Input only Setup Sub-menu, Surr Mode 2ch

Listening Mode Setup—Continued

e. Center Speaker

This option configures the center speaker to use when playing the source in the AAC listening mode. Select the speaker terminal to which the speaker you want to use is connected. This setting can be made when the “(Speaker B) Center” is set to “Main A” in the Speaker Configuration sub-menu.

•When the impedance setting for “Center A” or “Center B” in the Speaker Impedance sub-menu is set

to “6 ohms” or “4 ohms,” the available options will be “A” and “B.”

A (Default): Outputs the source from the speaker connected to the CENTER SPEAKERS A terminal.

B:Outputs the source from the speaker connected to the CENTER SPEAKERS B terminal.

A+B: Outputs the source from the speakers connected to the CENTER SPEAKERS A and CENTER SPEAKERS B terminals.

f. Surr L/R Sp

This option configures the surround speakers to use when playing the source in the AAC listening mode. Select the speaker terminals to which the speakers you want to use are connected. This setting can be made when the “(Speaker B) Surr L/R” is set to “Main A” in the Speaker Configuration sub-menu.

•When the impedance setting for “Surr L/R A” or “Surr L/R B” in the Speaker Impedance sub-menu is set to “6 ohms” or “4 ohms,” the available options will be

“A” and “B.”

A (Default): Outputs the source from the speakers connected to the SURR L/R SPEAKERS A terminals.

B:Outputs the source from the speakers connected to the SURR L/R SPEAKERS B terminals.

A+B: Outputs the source from the speakers connected to the SURR L/R SPEAKERS A and SURR L/R SPEAKERS B terminals.

g. Surr Bk Speaker

This option configures the surround back speakers to use when playing the source in the AAC listening mode. Select the speaker terminals to which the speakers you want to use are connected. This setting can be made when the “(Speaker B) Surr Back” is set to “Main A” in the Speaker Configuration sub-menu. However, when the “(Speaker A) Surr Back” is set to “BTL for Front,” “Bi-Amp for Front,” or “Not Used,” this setting will not be displayed.

•When the impedance setting for “Surr L/R A” or “Surr L/R B” in the Speaker Impedance sub-menu is set to “6 ohms” or “4 ohms,” the available options will be “A” and B.”

•When the settings for “(Speaker A) Surr Back” and “(Speaker B) Surr Back” in the Speaker Configuration sub-menu differ, the available options will be “A” and “B.”

A (Default): Outputs the source from the speakers connected to the SURR BACK L/R SPEAKERS A terminals.

B:Outputs the source from the speakers connected to the SURR BACK L/R SPEAKERS B terminals. A+B: Outputs the source from the speakers connected to the SURR BACK L/R SPEAKERS A and SURR BACK L/R SPEAKERS B terminals.

h. Subwoofer

This option configures the subwoofer to use when playing the source in the AAC listening mode. Select the terminal to which the subwoofer you want to use is connected. This setting can be made when the “(Speaker A) Subwoofer” is set to an option other than “Not Used” in the Speaker Configuration sub-menu. However, when the “(Speaker B) Subwoofer” is set to an option other than “Main A” in the Speaker Configuration sub-menu, the available options will be “A” or “Not Used.”

A (Default): Outputs the source only from the subwoofer connected to the SUBWOOFER PRE OUT A terminal.

B:Outputs the source only from the subwoofer connected to the SUBWOOFER PRE OUT B terminal. A+B: Outputs the source from the subwoofers connected to the SUBWOOFER PRE OUT A and SUBWOOFER PRE OUT B terminals.

Not Used: No subwoofers are used for playback.

Dolby Pro Logic IIx/DTS NEO:6 (2ch Input only) Setup Sub-menu

This sub-menu allows you to configure the audio effect and playback options when you play a 2ch input source in the Dolby Pro Logic IIx or DTS NEO:6 listening modes. This setting can be made when the “(Speaker A) Center” or “(Speaker A) Surr Back” setting is set to an option other than “Not Used” in the Speaker Configuration sub-menu.

•When the “(Speaker A) Surr Back” is set to “BTL for Front,” “Bi-Amp for Front” or “Not Used,” the PLII mode will be used instead of the PLIIx mode.

a. Surr Mode (2ch)

Selects the enhancement mode for playback when you play a 2ch source as a 6.1 or higher channel source through the DTR-10.5. The surround mode setting you select here will be applied to the Analog/PCM and D.F. 2ch input signals.

•The option “NEO:6 Music” will be available when the (Speaker A) Surr Back setting is set to “Main A” in the Speaker Configuration sub-menu.

PLIIx Movie (Default): Plays a 2ch source as a 6.1 or higher channel source using the Dolby Pro Logic IIx Movie mode.

PLIIx Music: Plays a 2ch source as a 6.1 or higher channel source using the Dolby Pro Logic IIx Music mode.

110