Integra DTR-10.5 Deleting Remote Controller Modes, Assigning Remote Controller Modes, mode

Other Settings for the Remote Controller—Continued

Deleting Remote Controller Modes

You can delete remote controller modes that you don’t need, such as modes for components that you don’t have. The AMP mode cannot be deleted.

1	Press and hold the [Custom] but-
Custom	ton for more than three seconds.
	The remote controller enters Custom
	mode.
2	Roll the scroll wheel to select
	“MODE,” and then press the scroll
	wheel.

3	Roll the scroll wheel to select
	“DEL,” and then press the scroll
	wheel.

4	Roll the scroll wheel to select the
	mode you want to delete, and then
	press the scroll wheel.

If the mode is deleted successfully, after “OK” has been displayed, the DEL dis- play (step 3) reappears.

Assigning Remote Controller Modes

You can change the combination in selecting the input source and remote controller mode simultaneously using the scroll wheel. For example, when the input source (top) is “TAPE1” and the remote controller mode (bottom) is “AMP,” you can change only “AMP”(the remote controller mode) to “CDR.”

1	Press and hold the [Custom] but-
Custom	ton for more than three seconds.
	The remote controller enters Custom
	mode.
2	Roll the scroll wheel to select
	“MODE,” and then press the scroll
	wheel.

3	Roll the scroll wheel to select
	“ASSGN,” and then press the
	scroll wheel.

4	Roll the scroll wheel to select an
	input source, and then press the
	scroll wheel.

5	Roll the scroll wheel to select the
	mode you want to assign to the
	specified input source, and then
	press the scroll wheel.

If the assignment is successful, after “OK” has been displayed, the ASSGN display (step 3) reappears.

140