Integra DTR-10.5 Connecting a CD Player, Turntable or Tuner, Connecting AV Components—Continued

Connecting AV Components—Continued

Connecting a Portable DVD Player or Video Camcorder

•When connecting a portable DVD player or video camcorder to the DTR-10.5, use the Video 7 Input terminals on the front panel.

•You can change the display name for the input source to represent the actual connected device (See page 97).

Game, Portable DVD,

Video Camcorder

AUDIO OUT	AUDIO OUT
DIGITAL	ANALOG		VIDEO	S VIDEO
OPTICAL	R	L	OUT	OUT

Video 7 Input

Digital S Video Video L Audio R

Connecting a CD Player, Turntable or Tuner

•When connecting a CD player to the DTR-10.5, make connections using digital or analog terminals. Before making connections, refer to page 32 for correct connections. This section shows the connection example when you use the default audio input assignment settings. However, when you use coaxial cables for digital audio signals, connect the CD player to any terminal between the AUDIO IN DIGITAL COAXIAL 1 and 6, and remember to configure the audio input assignment settings in the Audio Assign sub-menu (See page 94).

•When connecting a turntable, use the PH terminal. The PH terminal on the DTR-10.5 is designed for turntables that use a moving magnet (MM) cartridge. When you want to use a turntable with a moving coil (MC) cartridge, connect the turntable through a step-up transformer or head amplifier.

•If you assign other terminals to the PHONO input source, you need to configure the audio input assignment settings in the Audio Assign sub-menu (See page 94).

•When a turntable is equipped with a ground wire, connect the wire to the GND terminal on the DTR-10.5. However, some turntables may produce noise when the ground wire is connected to the DTR-10.5. In such a case, you do not have to connect the ground wire.

•When you want to perform analog recording of the audio signal or operate your -compatible Integra products via connections with the DTR-10.5, you have to make analog audio signal connections. Connect the audio output terminals on the source device to the AUDIO IN terminals on the DTR-10.5 using analog audio cables (RCA/ phono).

CD Player

When connecting to other audio terminals within the same terminal section, configure the audio input set- tings accordingly using the Audio Assign sub-menu (See page 94).

Turntable

AUDIO OUT AUDIO OUT

DIGITAL ANALOG

OPTICAL R L

GND

A B C DIGITAL IN

OPTICAL

1

2

“Net-Tune”

is a trademark of 3 Onkyo Corporation.

4

40

D DIGITAL IN	E	- CH	F	AUDIO IN	G		H S VIDEO	VIDEO
		MULTI	R	L	R	L
COAXIAL	FR	FL IN 1					IN	IN
1			PH		4		1
	SUB	C
2					5		2
				GND
	SR	SL	R	L
3			1		6		3
	SBR	SBL
4			2		7		4
	FR	FL

I	COMPONENT	J		K	L
	VIDEO
IN 1	IN 2	COMPONENT VIDEO			ANTENNA
		(HD/BNC)	IN
	Y		Y
	PB
			PB
	PR				FM
OUT 1	IN 3				75

PR

Y

OUT