Integra DTR-10.5 Connecting a DBS Tuner, DBS TV, or BS/CS Tuner, Installation, and Connections

Connecting AV Components—Continued

Connecting a DBS Tuner, DBS TV, or BS/CS Tuner

•When connecting a DBS tuner, DBS TV, or BS/CS tuner to the DTR-10.5, make connections for video and audio signals using digital and analog terminals. Before making connections, refer to pages 32 and 33 for correct connec- tions.

•This section shows the connection example when you use the VIDEO 4 or VIDEO 5 as an input. In this case, you do not need additional configurations. When connecting to other terminals within the same terminal section on the DTR-10.5, remember to configure the audio input assignment in the Audio Assign sub-menu (See page 94) and the video input assignment in the Video Assign sub-menu (See page 95). When you use the S VIDEO terminal for con- nection, you should configure the Video Assign sub-menu.

•You can change the display name for the input source to represent the actual connected device (See page 97).

•For a model without a slot for the HDMI terminal, when you connect a BS/CS tuner or LD player to the COMPO-

NENT terminals, be sure to use the COMPONENT terminals to connect a TV or projector.

*For more information on the HDMI interface, see page 45.

*For more information on the i.LINK (AUDIO) interface, see page 42.

Example for connecting with the VIDEO 4 as input

				When connecting to other video ter-
When connecting to other audio ter-
minals within the same terminal sec-	AUDIO OUT	AUDIO OUT		minals within the same terminal sec-
tion, configure the audio input	DIGITAL	ANALOG	VIDEO	tion, configure the video input
	OPTICAL	R L	OUT
settings accordingly using the Audio				settings accordingly using the Video
Assign sub-menu (See page 94).				Assign sub-menu (See page 95).

and Connections

A	B	C DIGITAL IN	D DIGITAL IN
		OPTICAL	COAXIAL
		1	1
		2	2
	“Net-Tune”	3	3
	is a trademark of
	Onkyo Corporation.
		4	4
	ETHERNET	5	5
	(Net -Tune)
		6	6

E		- CH	F	AUDIO IN	G
		MULTI	R	L	R	L
FR	FL	IN 1
			PH		4
SUB		C
					5
				GND
SR		SL	R	L
			1		6

SBR SBL

2 7

FR FL

38

SUB C

19

SR SL

H S VIDEO	VIDEO
IN	IN

1

2

3

4

5

6

I	COMPONENT	J		K	L
	VIDEO
IN 1	IN 2	COMPONENT VIDEO			ANTENNA
		(HD/BNC)	IN
	Y		Y
	PB
			PB
	PR				FM
OUT 1	IN 3				75
	Y		PR
			OUT
	PB		Y
					AM

PR

PB

	12 V	RS232
HDMI	TRIGGER
	OUT
	E
	IN 1
		IR IN

+12V DC PWR SUPPLY

20mA MAX.

GND

IN 2

MAIN

ZONE 2

ZONE 3

A 200mA MAX.

B 100mA MAX.

C 100mA MAX.

Installation

1	1
2	2
	OUT

	2		4
SBR	SBL
	3		5
	R	L	OUT R	L

MULTI

-CH IN 2

1 3

PR

2		4
	OUT	OUT
S VIDEO	VIDEO	VIDEO	S VIDEO

GND

D 100mA MAX.

E 100mATOTALMAX.

OUT

12V TRIGGER OUT

SURR R SURR BACK R (ASSIGNABLE) FRONT R CENTER

FRONT L SURR BACK L (ASSIGNABLE) SURR L

	R	L
AUDIO OUT	AUDIO OUT
DIGITAL		VIDEO
COAXIAL		OUT

When connecting to other audio terminals within the same terminal section, con- figure the audio input set- tings accordingly using the Audio Assign sub-menu (See page 94).

When connecting to other video terminals within the same terminal section, con- figure the video input set- tings accordingly using the Video Assign sub-menu (See page 95).

Example for connecting with the VIDEO 5 as input

39