Integra DTR-10.5 i.LINK Setup, Wakeup Setup, OSD for DVD Zone, DVD Output Synchro

i.LINK Setup

This menu can be used when connecting to an Integra i.LINK (AUDIO)-ready device.

Wakeup Setup

a. Wakeup on i.LINK (IEEE1394)

Specify connecting condition on standby of the DTR-10.5.

Enable: To be left connected.

Disable (Default): To be disconnected while the DTR-10.5 is on standby to save electricity.

be output in analog format when any source is selected for Zone 2.

Enable: Enables the DVD Output for Zone 2 function.

Disable (Default): Disables the DVD Output for Zone 2 function.

OSD for DVD

a. OSD for DVD

Even when a DVD player is directly connected to the TV, the OSD screen of the DTR-10.5 can be displayed on the TV monitor if the DVD player is an Integra i.LINK (AUDIO)-ready device. In this case, use the i.LINK cable to connect the i.LINK (AUDIO) terminal on the DTR-10.5 and i.LINK (AUDIO) terminal on the DVD player.

Disable (Default): Select this to block OSD screen display.

Left: Select this to display the OSD screen on the left side of the TV monitor.

Right: Select this to display the OSD screen on the right side of the TV monitor.

b. Select DVD

Select the name of the device that should display the OSD screen using the [ ]/[ ] cursor buttons if multiple Integra i.LINK (AUDIO)-ready devices are connected to the DTR-10.5. This item does not appear when “Disable” is selected in the OSD for DVD setting. Select “No” when you do not want to select any device.

OSD for DVD (Zone 2)

When listening in Zone 2, the same setting as above is available.

DVD Output Synchro

a. i.LINK Selector Change

This menu allows you to enable/disable the i.LINK Selector Change function. When an i.LINK (AUDIO)- enable device is used to playback, this function switches the input source to the one assigned to the device. Enable: Enables the i.LINK Selector Change function. Disable (Default): Disables the i.LINK Selector Change function.

b. DVD Output for Zone 2

This option automatically switches the i.LINK Audio Output of Integra’s DVD players. With this function enabled, audio signals of SACD will be output through i.LINK when no source is selected for Zone 2, or it will

120