Integra DTR-10.5 Connecting AV Components—Continued, Video cables, Installation and Connections

Connecting AV Components—Continued

•When you play the audio signal from the DIGITAL IN terminals in Zone 2, the source will be downmixed into 2- channel analog audio signal and output to the AUDIO OUT terminals.

•When you play the audio signal from the DIGITAL IN terminals in Zone 3, only the PCM signal will be output as an analog source to the AUDIO OUT terminals. Similarly, with this connection, you can record only the PCM signal as an analog source through the AUDIO OUT terminals.

•The audio input signal from the HDMI IN terminal can be output to the HDMI OUT terminal.

•The audio input signal from the MULTI-CH IN terminals in Zone 2 will be downmixed into a 2-channel source for output. You cannot play the source from the MULTI-CH IN terminals in Zone 3 and record it.

Video cables

Cable names		Cable forms	Terminals shapes	Description
Component video
connection cable
(RCA type)	Y	Y		In this connection, the video signal is decom-
	PB	PB		posed into three color difference signals (Y, Pb/
	PR	PR		Cb, and Pr/Cr) and carried through three
				cables, which provides better video quality than
				the S Video connection.
				The terminal shape for the component video
Component video				connection cable can be BNC-type or RCA-
				type. For the DTR-10.5, the USA and Canadian
connection cable				models are equipped only with RCA-type termi-
(BNC type)				nals, and the Australian model is equipped with
	Y	Y		both RCA-type and BNC-type terminals. You
	PB	PB		can also install an optional BNC type terminal
				board for USA and Canadian models.
	PR	PR		This connection cannot transmit information for
				controlling video devices (e.g., aspect ratio).
S Video connection				The video quality is better than with the com-
cable				posite signal. In this connection, the DTR-10.5
				cannot transmit the information for controlling
				video devices (e.g., aspect ratio).
Video connection				This connection transmits the standard video
cable
				signal and is widely used for various video
				devices such as TV and video recorder.
HDMI connection				This terminal board is optional.
cable				This connection carries the video signals digi-
				tally.
				(Note that no audio signal is carried with this
				unit.)

Note:

When you play the source in the remote zone (Zone 2 or Zone 3), connect the TV or monitor to the VIDEO 1, VIDEO 2, or VIDEO 3 terminal.

•Always refer to the instructions that came with the component that you are connecting.

•Do not plug in the power cord until all connections have been properly made.

•Insert all plugs and connectors securely. Improper connections can result in noise, poor performance, or damage to the equipment.

Example: Audio connection cable

Wrong!

Right!

•Do not bind audio/video connection cables with power cords and speaker cables. Doing so may adversely affect the picture and sound quality.

Installation and Connections

33