Integra DTR-10.5 instruction manual Subwoofer Main a

Speaker Placement—Continued

Main room A: 5.1 ch speaker system including the front speakers connected through the BTL or bi- amp connections

FL C FR

SW

Main room A

SL

SR

1-1.Speaker Config

=====================

Speaker A

a.Front L/R		:Main A
b.Center		:Main A
c.Surr L/R		:Main A
d.Surr Back
	:BTL for Front
e.Subwoofer		:Main A
	Speaker	B
f.Front L/R		:Not Used
g.Center		:Not Used
h.Surr L/R		:Not Used
i.Surr Back
:Not Used
j.Subwoofer		:Not Used

•For speaker system [A], set the surround back speaker parameters to “BTL for Front ” or “Bi-Amp for Front” and all the other speaker parameters to “Main A” (For details on speaker connections, see page 29).

•For speaker system [B], set the speaker parameters to “Not Used.”

*When using the BTL or bi-amp connections, you cannot use Zone 2 since the surround back channel is used for the front speakers of main room A.

Main room A: 7.1 ch from speaker system [A] and additional subwoofer and surround speakers from speaker system [B] (suitable for enjoying more powerful and lively surround sound in main room A); Main room B: two front speakers from speaker system [B] using the BTL or bi-amp connections

		FL			C		FR
	SW							SW
			Main room A
SL									SR
SL									SR
				SBL		SBR

FL FR

Main room B

1-1.Speaker Config

=====================

Speaker A

a.Front L/R	:Main A
b.Center	:Main A
c.Surr L/R	:Main A
d.Surr Back
:Main A	2ch
e.Subwoofer	:Main A
Speaker B
f.Front L/R	:Main B
g.Center	:Not Used
h.Surr L/R	:Main A

i.Surr Back

:BTL for Front j.Subwoofer :Main A

3-5.Multichannel Input

=====================

b.Re-EQ :Off

e.Surr L/R Sp :A+B

g.Subwoofer :A+B

Here is an example of the multichannel listening mode.

•For speaker system [A], set all the speaker parameters to “Main A.”

•For speaker system [B], set the surround speaker and subwoofer parameters to “Main A,” the front speaker parameters to “Main B,” and the surround back speaker parameters to “BTL for Front” or “Bi-Amp for Front” (For details on speaker connection, see page 29).

•When you want to use the surround speakers and subwoofer of speaker system [B] for specific sources, select the source and set the parameters for these speakers to “B” or “A+B” in the listening mode setup menu.

When you set the parameter to “B,” the audio signal comes out from the surround speakers and subwoofer of speaker system [B]. When you set the parameter to “A+B,” the signal comes out from the surround speakers and subwoofer of both speaker systems [A] and [B].

26