Integra DTR-10.5 instruction manual Speaker Placement—Continued, Installation and Connections

Speaker Placement—Continued

Main room A: 7.1 ch speaker systems and the two additional front speakers

(When you want to use speaker system [A] for movies and enjoy 7.1 surround sound and the two additional front speakers for classic music.)

FL FL C FR FR SW

Main room A

SL			SR
	SBL	SBR

1-1.Speaker Config

=====================

Speaker A

a.Front L/R	:Main A
b.Center	:Main A
c.Surr L/R	:Main A
d.Surr Back
:Main A	2ch
e.Subwoofer	:Main A
Speaker B
f.Front L/R	:Main A
g.Center	:Not Used
h.Surr L/R	:Not Used

i.Surr Back :Not Used

j.Subwoofer :Not Used

3-3.Stereo

=====================

a. Re-EQ/Academy :Off

b.Front Speaker: B

c.Subwoofer: A

Here is an example of the stereo listening mode.

•Set all the zone parameters for speaker system [A] to “Main A.”

•Set the front speaker parameters for speaker system [B] to “Main A.”

•If you want to use the front speakers of speaker system [B] for specific sources, select the source and set the front speaker setting parameters to “B” in the listening mode setup menu.

When you want to output to both speaker systems simultaneously, you can choose the “A+B” setting unless any of the speakers has an impedance of 8 ohm or lower.

•To output the sound, press the [Main A] button on the remote controller.

Main room A: 7.1 ch speaker system and the two additional front speakers connected through the BTL or bi-amp connection (when you want to use either the 7.1 ch speakers or the additional front speakers according to the source)

Installation and Connections

	FL	FL	C	FR	FR
SW

Main room A

SL			SR
	SBL	SBR

1-1.Speaker Config

=====================

Speaker A

a.Front L/R	:Main A
b.Center	:Main A
c.Surr L/R	:Main A
d.Surr Back
:Main A	2ch
e.Subwoofer	:Main A
Speaker B
f.Front L/R	:Main A
g.Center	:Not Used
h.Surr L/R	:Not Used

i.Surr Back

:BTL for Front j.Subwoofer :Not Used

3-3.Stereo

=====================

a. Re-EQ/Academy :Off

b.Front Speaker: B

c.Subwoofer: A

Here is an example of the stereo listening mode.

•Set all the zone parameters for speaker system [A] to “Main A.”

•For speaker system [B], set the front speaker parameters to “Main A” and the surround back speaker parameters to “BTL for Front ” or “Bi-Amp for Front” (For details on connections, see page 29).

•When you want to use the front speakers of speaker system [B] for specific sources, select the source and set the

front speaker parameters to “B” in the listening mode setup menu.

*When using the BTL or bi-amp connections, the two speaker systems cannot be used to output simultaneously due to the speaker impedance limitation.

25