Integra DTR-10.5 Listening Mode Setup, Mono Setup Sub-menu, Multiplex Setup Sub-menu

Listening Mode Setup

This menu allows you to configure the listening mode settings including audio effect and playback options.

Mono Setup Sub-menu

This sub-menu allows you to configure the audio effect and playback options when you play a source in the Mono listening mode.

a. Re-EQ/Academy

This option allows you to configure whether the Re-EQ or Academy effect is applied or not. Use these effects when you do not want to overemphasize the treble sound. This option can also be set for Zone 2.

Off (Default): The effects are not applied.

Re-EQ On: Adjusts the soundtrack in which the treble is overemphasized, so that the sound is optimized for home theater.

Academy On: Lowers the treble level and filters the noise when the source contains emphasized treble sound and too much hiss, such as an old mono audio movie recorded onto videotape.

b. Input Channel

This option configures the output method when you play the stereo input source in the Mono listening mode. This option can also be set for Zone 2.

Auto L+R (Default) : The same audio signals are output from the left and right speakers.

Left: When you play an input source with different languages recorded on each channel, the left channel is output from the left and right speakers.

Right: When you play an input source where different languages are recorded on each channel, the right channel is output from the left and right speakers.

c. Output Speaker

This option configures the speakers to use when playing the source in the Mono listening mode. Select the speaker terminals to which the speakers you want to use are connected.

Center A (Default) : Outputs the source only from the speaker connected to the CENTER SPEAKERS A terminal.

Center B: Outputs the source only from the speaker connected to the CENTER SPEAKERS B terminal. Center A+B: Outputs the source from the speakers connected to the CENTER SPEAKERS A and CENTER SPEAKERS B terminals.

Front L/R A: Outputs the source from the speakers connected to the FRONT L/R SPEAKERS A terminals. Front L/R B: Outputs the source from the speakers connected to the FRONT L/R SPEAKERS B terminals. Front L/R A+B: Outputs the source from the speakers connected to the FRONT L/R SPEAKERS A and FRONT L/R SPEAKERS B terminals. Note that this option is not available when the front speakers are in Bi- amp or in BTL configuration.

• When the “(Speaker B) Front L/R” is set to an option
other than “Main A” in the Speaker Configuration
sub-menu, the available options will be “Center A,”
“Center B,” “Center A+B,” and “Front L/R A.”
• When the “(Speaker A) Center” is set to “Not Used” in
the Speaker Configuration sub-menu, the available
options will be “Front L/R A,” “Front L/R B,” and
“Front L/R A+B.” In this case, the default setting is
“Front L/R A.”
• When the “(Speaker B) Center” is set to an option
other than “Main A” in the Speaker Configuration
sub-menu, the available options will be “Center A,”
“Front L/R A,” “Front L/R B,” and “Front L/R A+B.”
• When the impedance setting for either “Front L/R A”
or “Front L/R B” in the Speaker Impedance sub-menu
is set to “6 ohms” or “4 ohms,” “Front L/R A+B”
cannot be selected. Similarly, when the impedance
setting for either “Center A” or “Center B” in the
Speaker Impedance sub-menu is set to “6 ohms” or “4
ohms,” “Center A+B” cannot be selected.
• When the “(Speaker A) Center” is set to “Not Used”	Menu
and the “(Speaker B) Front L/R” is set to an option
other than “Main A” in the Speaker Configuration	Setup
d. Subwoofer
sub-menu, this setting will not be displayed.

This option configures the subwoofer to use when playing the source in the Mono listening mode. Select the terminal to which the subwoofer you want to use is connected. This setting can be made when the “(Speaker A) Subwoofer” is set to an option other than “Not Used” in the Speaker Configuration sub-menu. However, when the “(Speaker B) Subwoofer” is set to an option other than “Main A” in the Speaker Configuration sub-menu, the available options will be “A” or “Not Used.”

A (Default): Outputs the source only from the subwoofer connected to the SUBWOOFER PRE OUT A terminal.

B:Outputs the source only from the subwoofer connected to the SUBWOOFER PRE OUT B terminal. A+B: Outputs the source from the subwoofers connected to SUBWOOFER PRE OUT A and SUBWOOFER PRE OUT B terminals.

Not Used: No subwoofers are used for playback.

Multiplex Setup Sub-menu

This sub-menu allows you to configure the audio effect and playback options when you play a source in the D.F. Multiplex listening mode.

a. Re-EQ/Academy

This option allows you to configure whether the Re-EQ or Academy effect is applied or not. Use these effects when you do not want to overemphasize the treble sound. This option can also be set for Zone 2.

Off (Default): The effects are not applied.

99