Integra DTR-10.5 Direct button, Pure a button, Test Tone, CH SEL, Level- & Level+ buttons

Index Parts and Facilities—Continued

EDirect button

This button is used to select the Direct listening mode.

FPure A button

This button is used to select the Pure Audio listen- ing mode.

GTest Tone, CH SEL, Level– & Level+ buttons

These buttons are used to adjust the level of each speaker individually. These functions can be set only with the remote controller. The [Level–] and [Level+] buttons are also used to adjust the volume in Zone 2 or Zone 3.

HAudio SEL button

This button is used to select the audio input signal format (e.g., analog, digital, etc.).

ILIGHT button

This button is used to turn on or off the remote con- troller’s illuminated buttons.

J Direct Tuning button

SMain B button

For the speakers used in main room B, every press of this button toggles the status between enabled and disabled.

TAll CH ST button

This button is used to select the All Ch Stereo listening mode.

UStereo button

This button is used to select the Stereo listening mode.

V DSP/DSP buttons

These buttons are used to select the listening modes.

WRe-EQ button

This button is used to turn on and off the Re-EQ function.

XL Night button

This button is used to set the Late Night function.

Getting Started

This button is used with the number buttons to select a radio station by entering its frequency. Press this button first, and then use the number buttons to enter the frequency.

KDisplay

The top line of this LCD display shows the name of the currently selected input source. The bottom line shows the currently selected remote controller mode.

LZone 3 button

This button is used when you want to set the volume and input source for Zone 3.

MZone 2 button

This button is used when you want to set the volume and input source for Zone 2.

NInput button

This button is used to select the input source. Press this button first, and then roll the scroll wheel until the name of the input source appears on the display.

OSleep button

This button is used to set the Sleep function. This function can be set only with the remote controller.

PVOL button

This button is used to set the volume of the DTR-10.5.

QSetup button

This button is used to access the onscreen setup menus (OSD) that appear on the TV.

RMuting button

This button is used to mute the DTR-10.5. This function can be set only with the remote controller.

19