Integra DTR-10.5 Listening to Radio Broadcasts—Continued, To select a preset by number, use the

Listening to Radio Broadcasts—Continued

Tuning Mode

Memory Tuner

Select/Preset

Presetting a Radio Station

Up to 40 stations can be stored in memory as preset radio stations.

1	Tune into the radio station you
	desire (See “Tuning Into a Radio
	Station”).
2	Press the [Memory] button on the
Tuning	front panel.
Mode	Memory
		Flashes

3	Using the [Select/Preset] dial,
	select a preset number (from 1 to
	Select/Preset
	40) to assign the station.
	The “MEMORY” indicator blinks for 5
	seconds. Complete the procedure while
	the “MEMORY” indicator blinks. If the
	“MEMORY” indicator disappears
	before completing the procedure, go
	back to step 2 and repeat the procedure
	again.

4		Press the [Memory] button to final-
Mode	Memory	ize the procedure.
Tuning
		Lights
		You can enter text names for any of the
		preset radio stations (See page 97).

Selecting a Preset Radio Station

When using the DTR-10.5:

1	Tuner	Press [Tuner] input source button
		on the DTR-10.5.
2	Select/Preset	Using the [Select/Preset] dial,
		select the number of the desired
		preset station.
When using the remote controller:
1		Press the [Input] button, and then	Operations
		use the scroll wheel to select
	Input	TUNER.

To switch to FM or AM, press the scroll wheel.

2			Use the [CH/Disc +/–] button to
			select the presets.
	+		Selecting Presets by Number
			To select a preset by number, use the
		CH
			remote controller’s number buttons. For
	Disc

- example, to select preset #7, press [7]. To select preset #12, press [1] then [2].

Erasing a Preset Radio Station

1	Press the [Tuner] input source but-
Tuner	ton and use the [Select/Preset]
	dial to select the preset radio sta-
	tion that you want to erase (See
	above).
Select/Preset

2		Press and hold the [Memory] but-
		ton and then press the [Tuning
Tuning		Mode] button.
Mode	Memory
		The selected preset station is erased.

63