Integra DTR-10.5 instruction manual Enjoying Movies and Music in a Remote Zone, Operations

Enjoying Movies and Music in the Remote Zone (Zone 2/3)—Continued

When Connecting the Power Amplifier (Zone 2 or Zone 3)

•You can enjoy a different source in a remote zone while a 7.1 channel source is being played in the main room.

•Adjust the volume level on the DTR-10.5 (not on the power amplifier).

Main Room

TV

DTR-10.5

	R	L	OUT	OUT
				VIDEO
Zone 2/Zone 3
	IN			TV
R	L
			Power amp

1 Connect the power amplifier for Zone 2 or Zone 3 to the DTR-10.5.

Connect to any of the following terminals:

•AUDIO OUT 1-5

•DIGITAL OUT OPTICAL 1-2

•DIGITAL OUT COAXIAL 1-2

2	Connect the speakers for Zone 2 or Zone
	3 to the power amplifier.
3	Connect the video component for Zone 2
	or Zone 3 to any of the composite VIDEO
	OUT 1-4 terminals.
4	Set the Setup menu.

1.On the Setup menu (See page 91), select “Speaker/Output Setup” → “Audio Output Assign,” and set the terminal to which the component is connected to “Zone 2 Out” or “Zone 3 Out.”

2.Then, set “Zone 2 Out” or “Zone 3 Out” in the Audio Output Assign sub-menu to “Pre Out (variable).”

3.Similarly, select “Speaker/Output Setup” → “Video Output Assign,” and set the terminal to which the component is connected to “Zone 2 Out” or “Zone 3 Out.”

4.Press the [Setup] button to close the menu.

Enjoying Movies and Music in a Remote Zone

•The sleep timer in the main room also works in Zone 2 and Zone 3. To make the sleep timer effective only in Zone 2 or Zone 3, set the sleep timer on the DTR-10.5 in the main room, and then put it into the standby status.

•When “Speaker B Surr Back” is set to “Powered Zone 2” on the Speaker Configuration sub-menu of the Speaker/Output Setup menu, 7.1 channel play- back is disabled in the main room.

•Sounds and pictures that can be output to Zone 2 and Zone 3 are as follows:

	From Input	ZONE	REC/	To Output Terminal
	Terminal	2	ZONE
			3
	i.LINK	✔	✔*1	AUDIO OUT 1-5
	(AUDIO)	✔*2	✔*2	DIGITAL OUT OPTICAL 1-2
	(Option)
		✔*2	✔*2	DIGITAL OUT COAXIAL 1-2
Input
	ETHERNET	✔	✔	AUDIO OUT 1-5
Audio	(Option), PH,			DIGITAL OUT OPTICAL 1-2
	AUDIO IN 1-9
				DIGITAL OUT COAXIAL 1-2
	DIGITAL IN	✔*3	✔*1	AUDIO OUT 1-5
	OPTICAL 1-6,
		✔	✔	DIGITAL OUT OPTICAL 1-2
	DIGITAL IN
	COAXIAL 1-6	✔	✔	DIGITAL OUT COAXIAL 1-2
Input	VIDEO IN 1-6,	✔*4	✔*4	VIDEO OUT 1-4
	S VIDEO IN 1-
				S VIDEO OUT 1-4
Video	6, COMPO-
	IN 1-6			COMPONENT VIDEO OUT
	NENT VIDEO

*1 Only PCM output

*2 Super Audio CD and DVD-Audio are not output. *3 Possible for 2 channel downmix signal.

*4 In the case of COMPONENT VIDEO IN, possible if the HDMI slot is inserved.

Columns covered by “ \ ” indicate that no setting related to the column is specified for Zone 2 Out or Zone 3 Out in “Audio Output Assign” or “Video Output Assign.”

Operations

67