Integra DTR-10.5 Listening to Radio Broadcasts, Using the Tuner, Tuning into a Radio Station

Listening to Radio Broadcasts

Using the Tuner

One of the features of the DTR-10.5 that is most frequently used is its ability to play FM and AM broadcast radio stations. The DTR-10.5 provides a number of listening modes perfect for listening to the radio and getting the most out of your audio system. Also, by presetting radio stations that you listen to frequently, you can select them easily by pressing the [CH/Disc +/–] button on the remote controller.

Setting the AM Tuning Interval

For the Australian model, you have to adjust the “AM Frequency Step” setting according to your area.

Use the Setup menu to adjust the “AM Frequency Step” setting.

To perform this setting, go to “Hardware Setup” → “AM Frequency Setup” → “Frequency Step,” and select “9 kHz” or “10 kHz.” For details on this setting, see page 87.

Tuning into a Radio Station

Tuner

Master Volume

Standby/On

Display		Tape 1	Tape 2	Tuner	Phono	CD	Net Audio
DVD	Video 1	Video 2	Video 3	Video 4	Video 5	Video 6	Video 7

Band Frequency

When the FM stereo broadcast contains much noise:

Press the [Tuning Mode] button to switch to the manual tuning mode. The “AUTO” indication disappears and the tuner turns into the monaural mode. In the monaural mode, the noise will be reduced and the broadcast be easier to hear.

Tuning into a Radio Station Manually (manual tuning)

1	Press the [Tuner] input source
Tuner	button.
	Each time you press the [Tuner] button,
	the input source changes between AM and
	FM.
2	Press the [Tuning Mode] button to
Tuning	turn off the “AUTO” indication.
Mode	Memory

Tuning Mode Select/Preset

Tuning into a Radio Station Automatically (automatic tuning)

3

Control/Tuning

Turn the [Control/Tuning] dial either clockwise or counterclockwise to tune your station.

Turning counterclockwise decreases the frequency, and turning clockwise increases the frequency.

1		Press the [Tuner] input source but-
		ton.
	Tuner
		Each time you press the [Tuner] button,
		the input source changes between AM
		and FM.
2	Tuning	Press the [Tuning Mode] button to
	Mode	Memory

•The tuner frequency changes in 200 kHz (50 kHz) increments for FM and 10 kHz (or 9 kHz) increments for AM.

•When you tune into an FM station manually, the tuner turns into monaural mode. If you want to listen to the FM station in stereo, press the [Tuning Mode] button.

Specifying Radio Stations by Frequency

turn on the “AUTO” indication.

Remote controller

Clear

#

Direct Tuning

To select a radio station by entering its frequency, press the remote controller’s [Direct

3

Control/Tuning

Turn the [Control/Tuning] dial either clockwise or counterclockwise. This starts tuning automatically.

The tuner stops automatically where it tunes into a station.

When you tune into a radio station, TUNED indicator appears in the

display. If you tune into an FM station in stereo, then “FM STEREO” appears.

1 2 3

@.-'/ ABC DEF

4 5 6

GHI JKL MNO

7 8 9

PQRS TUV WXYZ

+10 0

--/---

Tuning] button, and then use the number buttons to enter the frequency.

62