4 GETTING STARTED
CAUTION
!Use only the power adaptor that came with this unit. (Telephone base: 6Vdc/500mA, charger: 6Vdc/150mA). Using other power adaptors may damage the unit. Contact your local distributor if you need to order replacement for the power adaptors.
Purchasing additional handsets
You may expand your cordless system by adding more handsets (M8050). These can be purchased separately from the retailer where you purchased the product, or directly from Oricom (Australia) www.oricom.com.au.
The M800 can accommodate a total of 5 cordless handsets.
Battery installation
For optimum battery performance, charge the battery for 14 hours before first use.
1.Remove the battery compartment cover.
2.Insert the AAA rechargeable batteries in the battery compartment, matching the +/- polarity markings.
3. A l i g n t h e c o v e r a g a i n s t t h e b a t t e r y compartment and slide it upwards until it clicks into place.
4.Charge the handset by placing it in the telephone base or charger. The light on the handset is on when charging.
CAUTION
!To reduce the risk of fire or personal injury, use only the Oricom approved model (400mAh 1.2V
WARNING
!• Observe the proper polarity, or direction, of any battery. Reverse insertion of the battery cell can result in leakage or explosion.
•Remove the batteries if you do not plan to use the product for several months at a time.
•Follow the local regulations regarding the disposal of your packing materials, exhausted batteries and used phone. Wherever possible, recycle those materials.
