Answering system 31

Note:

If you select TOLL SAVER, the system answers after the second ring if there are new messages, or after the fourth ring if there is no new message. This allows you to check your system to see if there are new messages before incurring toll charges.

Security code for remote access

Your answering system allows you to program a 4-digit security code to get access to the system through any touch-tone telephone. The default

security code is 0000.

To view the current remote code:

1.[].

2.[]/[]: ANS SYSTEM -> [ ].

3.[]/[]: SETTINGS -> [].

4.[]/[]: REMOTE CODE -> [].

5.[]: VIEW CODE. The screen displays the current remote code.

4.[]/[]: REMOTE CODE -> [ ].

5.[]/[]: CHANGE CODE -> [ ].

6.Use the dial key pad to enter a new 4-digit security code -> [].

7.Enter the code again -> [].

Call screening

When the answering system answers a call, you can listen at the telephone base while the caller leaves a

message.

At the telephone base:

The message automatically plays on the telephone

base. Use the [] button to adjust speaker volume.

From a cordless handset:

1.[]. The caller’s voice will be heard while the answering system is recording the message.

2.To intercept during handset screening, press [] button on the handset. The answering system will automatically stop recording when you do so.

To change the remote code:

1.[].

2.[]/[]: ANS SYSTEM -> [ ].

3.[]/[]: SETTINGS -> [].

Message playback using the telephone base

1.Press [] on the telephone base to listen to the messages, the number of messages will be displayed on the base screen.

Page 33
Image 33
Oricom M800 warranty Security code for remote access, Call screening, Message playback using the telephone base