Answering system 33

Message window

The table below summarizes the messages displayed on the telephone base display.

-

When the answering system is

 

turned off.

00 (ON steadily)

There are no messages in the

 

answering system.

1-59(flashing)

Total number of new messages.

1-59(On steadily)

Total number of old messages.

F (flashing)

Memory is full.

CL (flashing)

Time is not set and there are

 

old messages.

LA (flashing)

The telephone is being

 

accessed remotely.

LA/1-59

The telephone is being

(alternating)

accessed remotely and the

 

alternating number indicates

 

the total number of messages.

L0-L5(On steadily)

Telephone base volume level

 

when adjusting.

Access the answering system remotely

1.Dial your phone number from any touch-tone telephone.

2.Once your answering system takes your call

and you hear your outgoing announcement, press the [#] key.

3.Enter your security code using the numeric keypad on the touch-tone telephone. The system will start playing messages after you hear a confirmation tone.

Notes:

1.If your answering system is off, you will not hear your outgoing announcement. The system will answer your call after 10 rings.

2.If you have entered an incorrect security code, the system will ask you to enter the code again.

3.If you have forgotten the security code, you will need to reset the system. The security code will be restored to its default setting as 0000 after system reset.

Remote access commands

Touch-tone

Remote command

 

 

1

Replay the current or previous message.

2

Play/stop messages.

3

Skip to the next message.

4

Turn the answering system on or off.

0

Delete the current message.

Page 35
Image 35
Oricom M800 warranty Message window, Access the answering system remotely, Remote access commands