Caller ID
If you subscribe (charges may apply) to your telephone service providers Caller ID service, numbers of the incoming calls will be displayed on the display and stored in the call log. (Please consult your telephone service provider for details about this service)
When an external call comes in, the display will show either:
•The name of the phonebook entry if the number of the incoming number is the same as the number of the phonebook entry, or
•The first 10 characters of the name of the phone book entry, or
•The last 16 digits of the number of the phone book entry if the name is unavailable, or
•NOT AVAIL for Out of Area calls and PRIVATE for Private calls
The 
icon will be displayed if the number of the CID is displayed and has more than 16 digits.
When you have new/unanswered calls, the 
icon on all the handsets that currently connected to the same base unit will be turned on.
Call Waiting Caller ID
If you have subscribed to your telephone network operators Call Waiting Caller ID service, your phone will display the number of the other incoming call for around 7 seconds while you are talking on the phone.
•While the handset is on an external call, a series of short beeps is heard.
•Press 
then 
will place the first external call on hold and answer the 2nd call.
•Press 
then 
to toggle between two calls.
(Please consult your telephone service provider for details about the service).
Call Log
The call log stores the last 20 unanswered and answered incoming calls, up to 10 characters for names or prompt messages, 18 digits for numbers, date and time.
If a number has been identified several times, it will be stored each time the phone rings. Once the 20 numbers are stored the next incoming unanswered or answered call will replace the first stored number.
Once the call log has been reviewed, the 
icon on the display of that handset will turn off.
Note: The call log is stored on the handset. Deletion of call records on one handset is not applicable to all other handsets registered to the same base unit.
Reviewing the Call Log
•Press 
during predial or standby.
•The most recent received CID is displayed.
•If the call log is empty, EMPTY will be displayed for 2 seconds and returned to standby.
•Press 
to view the next available information. For example,
pressing 
on the name will bring out the first 16 digits of the
number with the 
icon turned on. Press 
again to view the
remaining digits and the 
icon is on. Press 
again to display
Date / Time and pressing 
at Date / Time will display the name and so on.
•Use 
to scroll through the call log.
•To exit, press 
29 of 72 | 30 of 72 |
