Oricom MI40 manual Change the PIN Code for Base, Reset Factory Default

•Press. HANDSET 1 will be displayed.

•Use to select the desired handset (HANDSET 1 to HANDSET 5) to be deleted.

•Press to confirm the selection. The display will read PIN?

•Enter the correct PIN of the connected base and press to confirm the deletion of the handset.

Note: You cannot de-register the handset you are using.

Change the PIN Code for Base

PIN code for the base unit is required in order to

•Change Prefix settings,

•Change Call Barring settings,

•Register a handset,

•Deregister a handset,

•Reset the phone settings, and

•Change the current PIN.

The PIN code can be zero to eight digits.

To change the PIN code:

•Press. Use to scroll through the menu until the display reads SYSTEM.

•Press. Use to scroll through the menu until the display reads CHANGE PIN.

•Press. The display reads PIN?

•Enter the correct PIN of the connected base.

•Press. The display reads NEW PIN.

•Enter the new PIN (maximum 8 digits).

•Press to confirm. The display will read REPEAT.

•Re-enter same PIN again.

•Press to confirm and exit to CHANGE PIN.

•Press and hold will exit to standby.

Note: If you changed the PIN CODE, you’ve to use the new PIN CODE in all handsets.

Reset Factory Default

All settings for both the handset and base can be restored to the factory defaults by this menu.

•Press. Use to scroll through the menu until the display reads RESET.

•Press. Use to scroll through the menu until the display reads SETTINGS.

•Press. The display reads PIN?

•Enter the correct PIN of the connected base.

•Press to confirm. The display will read RESET?

•Press to confirm.

Note: User cannot restore factory default setting on the base or on the handset alone. Also, if you want to restore factory setting on other handset currently connected to the same base, you will need to restore factory setting on that handset.

69 of 72 70 of 72