•Use 
scroll through the menu until the display reads ANSWER MAC.
•Press
.
•Use 
to scroll until the display reads RING DELAY.
•Press
. The current ring delay will be displayed.
•Use 
to select among ECONOMY, RING2 to RING7.
•Press 
to confirm the selection and exit to RING DELAY.
Alert Tone
When the alert tone is set to ON, a short beep will be emitted once every minute from the handset speaker during standby when there is at least one new ICM or new memo on the answering machine.
•Press 
to enter the menu mode
•Use 
scroll through the menu until the display reads ANSWER MAC.
•Press
.
•Use 
to scroll until the display reads ALERT TONE.
•Press
. The current setting is displayed.
•Use 
to select ON or OFF.
•Press 
to confirm the selection.
Note: This feature is handset dependent. You may turn this feature on and off on each handset registered to the system.
Message Length
User can specify the maximum duration of the message (ICM) or memo that can be recorded. There are two choices of message length: 1 minute or 2 minutes.
•Press 
to enter the menu mode
•Use 
scroll through the menu until the display reads ANSWER MAC.
•Press
.
•Use 
scroll through the menu until the display reads MSG LENGTH.
•Press
. The current message length will be displayed.
•Use 
to select one of the two choices.
•Press 
to confirm the selection and exit to MSG LENGTH.
Speaker Filtering
Speaker Filtering is to allow all calls to be listened on the speaker of handsets #1. Once activated, handsets #1 speaker will be turned on automatically when the answering machine answers the call. User will be able to hear the OGM and ICM recording from handset #1 speaker.
•Press 
to enter the menu mode
•Use 
scroll through the menu until the display reads ANSWER MAC.
•Press
.
•Use 
scroll through the menu until the display reads SPK FILTER.
•Press
. The current setting will be displayed.
•To activate speaker filtering,
41 of 72 | 42 of 72 |
