•To turn off the ringer volume, press 
on VOL OFF. The 
icon on the display will be turned on.
•You can also press and hold 
during phone ringing or standby to turn off the ringer. The 
icon on the display will be turned on. To turn on the ringer, user can press and hold 
during phone ringing or standby. The 
icon on the display will be turned off.
Adjusting the Receiver Volume
During a call, user can adjust the receiver volume by pressing
.
There are 3 levels of receiver volume to choose from: 
, 
& 
.
•Press 
, the current volume level is displayed.
•Press 
to increase the volume.
•Press 
to decrease the volume.
Handsfree Operation
Using the Handsfree Speaker
•Press 
for handsfree operation during a call.
•The earpiece is turned off and the speaker is turned on. You can now talk into to the microphone without holding the handset to the ear.
•Press 
again. The speaker is turned off and the earpiece is turned on. You will need to hold the handset against the ear.
Using a Headset (Not supplied)
•Gently flip back (do not remove) the rubber cover on the side of the handset to gain access to the headset socket.
•Plug the headset into to the headset socket.
•The handset receiver and microphone are now turned off.
•You can now talk into to the microphone of the headset without holding the handset to the ear.
•For additional mobility and full handsfree, mode clip handset to your belt using the clip supplied.
Microphone Mute / Un-mute
During a call, User can mute the microphone by pressing
The 
icon on the display will turn on. To 
again. The 
icon on the display will turn off.
Handset Locator (page function))
In the event of misplacing the handset, briefly press the 
button on the base unit will page all handsets. All handsets on standby will ring
for 30 seconds. The 
icon and the prompt BS PAGING will be blinking on the display. User can press any key on a handset to stop the paging. Note: If you press and hold the page key for more than 4 seconds, the phone will enter into registration mode.
Handset Keypad Lock/Unlock
You can lock the handset to prevent pressing any keys accidentally. When the keypad is locked, all keys will be inactive.
To lock:
•Press and hold 
during standby.
•The display will show HOLD #.
To unlock:
•Press and hold 
during standby.
Note: When a call comes in, user can answer the call by pressing 
if the handset is not on cradle or lift the handset from the cradle
23 of 72 | 24 of 72 |
