Manuals / Orion / Computer Equipment / Network Router

Orion 2000 manual ¾ show cpe-info Display CPE information, CMshow cpe-info, Port, 0002.8A0E.E674

Models: 2000

1 80

Download 80 pages 4.16 Kb

Page 41

Image 41

RIP expire time: 180 seconds

RIP garbage time: 120 seconds

TFTP Server IP address : 24.196.48.38

Cable Modem IP address : 10.54.5.186

Configuration file : cbn-2000-512-3cpe.cm

Lease time : 604800 (secs)

UTC time offset : 14400 (secs)

Router IP address : 10.54.4.1

SubnetMask : 255.255.252.0

DHCP server : enable

Router DHCP server IP range from 24.196.57.13 to 24.196.57.14

DNS server(1) 24.196.48.39

DNS server(2) 24.196.48.40

DHCP server lease time : 1800

DHCP Domain Name option : disable.

Web access control

CPE interface web access enable.

Cable interface web access enable.

Access List is empty

PPPoE forwarding disable.

Number of CPE limitation

MAC address limit: unlimited

IP address limit: unlimited

¾show cpe-info Display CPE information

Example:
CM>show cpe-info
MAC	IP	Port
0002.8A0E.E674	0.0.0.0	USB
0800.465B.69B2	192.168.100.2	Ethernet

¾show downstream Display downstream information

User’ Guide

Page 41

Image 41

Orion 2000 manual ¾ show cpe-info Display CPE information, CMshow cpe-info, Port, 0002.8A0E.E674, 0.0.0.0, 0800.465B.69B2

Contents

Cable Router OrionUser’s Guide Rev. 1.2a3. INSTALLING THE MODEM USING THE ETHERNET PORT 2. INSTALLING THE CABLE MODEM USING THE USB PORT4. CABLE MODEM LEDS AND CONNECTORS 5. TELNET COMMANDSDebug 6. MODE OF OPERATIONUser’ Guide User’ Guide 9. DOCSIS CONFIGURATION FILE VSIF TAG SUPPORT7. WEB USER INTERFACE Limitations set by your Cable Service Provider Understand the Cable Modem’s Features1. Before You Begin Contact Your Local Cable OperatorGather Supplied and Required Items Prepare Your Area for Cable Modem InstallationSupplied Not SuppliedInstalling the Software Drivers Before Hardware Connection 2. Installing the Cable Modem Using the USB Port3. You will see the following Welcome screen 1. Double click the “Setup.exe” program in the CD4. Click “Next”. You will see the following Start screen User’ GuideUser’ Guide 5. Click “Next”. You will see the following ‘Complete’ screenInstalling the Hardware Installing the Software Drivers in Windows 98 SE Operating System Installing the Software DriversUser’ Guide CAUTION You must verify that Ambit USB Cable Modem appears on the screen. If USB Composite Device appears, you must click Back twice and specify the correct location of the driver files. DO NOT proceed if USB Composite Device is displayed in the above window. Contact your cable provider for further assistance User’ Guide User’ Guide 8. After files copying is done, you will see the following screenInstalling the Software Drivers in Windows Me Operating System User’ Guide User’ Guide 6. Click Yes to restart the computerInstalling the Software Drivers in Windows 2000 Operating System User’ Guide User’ Guide Installing the Software Drivers in Windows XP Operating System User’ Guide User’ Guide 2. Click the Device Manager tab Troubleshooting the USB InstallationNone of the LEDs is on when I power on the LAN Cable Modem 4. Select USB Composite Device and click Remove 5. Click Refresh Uninstalling the USB Driver 3. Installing the Modem Using the Ethernet PortNone of the LEDs are on when I power on the Cable Modem Troubleshooting the Ethernet InstallationThe ENET LED on my cable modem is not lit Installing the Hardware4. Cable Modem LEDs and Connectors LEDs on the Front of the Modem Connectors on the Back of the ModemUser’ Guide Getting Help 5. Telnet commandsNote Cable Modem Router Telnet IP address is CMshow ? CMshow interTab CMshow interface Redisplaying a commandUndebug Debug¾ debug CMdebug ?CMimage upgrade ¾ image upgradeImage PingCMpwd admin PasswordCMuser-level admin ¾ show config-fileCMshow dhcp ¾ show dhcp¾ show version CMshow versionCMshow interface ? ¾ show interface¾ show interface ethernet CMshow interface ethernetCMshow running-configuration CMshow running-config ¾ show running-configuration Display system running information¾ show interface usb CMshow interface usbDownstream Receive Power Level -11.44 dBmv Downstream SNR 30.03 dB RIP status Enable RIP send version Downstream informationUpstream Transmit Power Level 46.00 dBmv Upstream Symbol Rate 2560 ksym/sec Upstream Frequency 32784000 HzCMshow cpe-info ¾ show cpe-info Display CPE informationPort 0002.8A0E.E674CMshow nat config ¾ show nat configCMshow downstream ¾ show upstreamadmin CMshow nat timer¾ show access-list ¾ show nat time¾ show pppoe-forwarding Display PPPoE enable or disable CMshow access-list¾ nvram factory-default NVRAMNote if NAT is enabled, the following DHCP command can bet set ¾ dhcp enable/disable Enable/disable dhcp serverDHCP ¾ tftp server Server IP address¾ dhcp gateway ip address Set DHCP gateway ip address ¾ dhcp ip-pool delete 1-20/allCMdhcp reserve-mac add 192.168.100.4 0002.8A25.251D CMshow dhcp ExampleOne to one mapping ¾ ip nat enable/disableCMnat static ipmapping add 68.5.203.16 CMshow nat configCMshow nat config NAT Enable Port forwarding setting¾ nat static ipmapping delete index/all CMnat static portmapping add 21 192.168.100.23 ftpCMnat static ip disable ¾ nat static ip enabledisableipaddressCMnat static ip enable CMnat static portmapping deleteCMinterface ethernet address 192.168.100.1 mask Interfaces¾ interface ethernet mac-address mac address CMinterface ethernet mac-address 0008.0E86.1118¾ interface ethernet startup ¾ interface ethernet shutdown¾ interface cable upstream channel id Change upstream channel ID ¾ interface cable shutdown¾ ip natroute enable/disable ¾ ip route enable/disable¾ ip nat enable/disable Enable/disable NAT/PAT function ¾ rip timer update second Set routing table update timeCMrip key-chain 1 10 start-time 2002-4-20 ¾ rip defaultCMrip key-chain 1 5 key-string abcdefg CM interface ethernet auth-mode md5Access-list Web-accessCMaccess-list 41 permit 00d0.5921.3354 ffff.ffff.ffff Example¾ access-list delete list IDall Reset¾ pppoe-forwarding enabledisable Optional ¾ copy tftpconfig tftp server ip address configuration filename¾ quit Disconnect telnet QuitBridge mode 6. Mode of OperationNAT mode ¾ ip nat enable¾ ip route enable Routing modeCMrip key-chain 1 1 key-string abcdefg CMip route enable CMreset CMinterface ethernet address 24.30.206.1 mask¾ ip natroute enable NAT/Routing modeTelnet commands ExampleUser’ Guide CMrip key-chain 1 1 key-string abcdefg CMip natroute enable CMresetCMinterface cable rip auth-mode md5 7. Web User Interface Accessing the Web User InterfaceWeb User Interface Home Page Cable Modem InformationUser’ Guide Cable Modem StatusUser’ Guide DownstreamUser’ Guide UpstreamUser’ Guide Upstream BurstUser’ Guide Operation ParametersUser’ Guide Event LogBridge Mode NAT/Router configurationReset NAT Mode Gateway LAN InterfaceWAN Interface SubmitUser’ Guide Router ModePublic IP Address subnet mask RIP status Authentication mode Routing Protocol LAN InterfaceAuthentication Key Chain Private IP Address subnet mask RIP status Authentication modeKey Chain Key ChainDelete Click “Reset” to use displayed parameters, cable modem will reset ResetSubmit Click “Submit” to change displayed parametersUser’ Guide NAT Router Mode Routing ProtocolWAN Interface Gateway LAN InterfaceLAN Interface Key Chain Authentication mode Authentication Key ChainListing of key Input key Index ID, Key String, Start time, and End timeClick “Reset” to use displayed parameters, cable modem will reset ResetListing of key Chain Input key Index ID, Key String, Start time, and End timeDHCP Gateway LAN SetupUser’ Guide Domain Name ServiceIP-pool Default IP-pool 1 supports 192.168.100.2~192.168.100.21 Meaning 9. DOCSIS configuration file VSIF tag supportcopy tftpconfig 172.21.1.250 cmconfig.txt Pwd admin Cableroot abcdefg rip key-chain1 1key-string cablerouter

¾show cpe-info Display CPE information

CM>show cpe-info

Port

0002.8A0E.E674

0.0.0.0

0800.465B.69B2

192.168.100.2

Ethernet

¾show downstream Display downstream information