Orion 2000 manual NAT/Routing mode, ¾ ip natroute enable, Example, Telnet commands

NAT/Routing mode

¾ip natroute enable

Enable NAT and Routing simultaneously. Enable natroute will also enable DHCP automatically for NAT-private subnet. Default NAT-private subnet is 192.168.100.0/27. DHCP is disabled automatically on public subnet.

Example:

‰RIPv2 with MD5 authentication mode enable, key-string “abcdefg”

‰Public subnet 24.30.206.0/29

•(5) Static Public IPs 24.30.206.2~24.30.206.6

•Gateway IP address 24.30.206.1

‰NAT-Private subnet 192.168.100.0/24

•(253) Dynamic Private IPs 192.168.100.2~192.168.100.254

•Gateway IP address 192.168.100.1

•NAT-Private subnet WAN IP address 24.20.206.1

Telnet commands:

CM>interface ethernet address 24.30.206.1 mask 255.255.255.248

CM>interface ethernet address 192.168.100.1 mask 255.255.255.0 nat-private CM>interface cable rip key-chain 1

User’ Guide 59