Set TFTP filename to "ram.cpr"

¾tftp server {Server IP address}

Establishes the IP address of the TFTP server for firmware download

Example:

CM>tftp server 92.146.1.250

Set TFTP Server to 92.146.1.250

DHCP

¾dhcp {enable/disable} Enable/disable dhcp server

¾dhcp lease-time{ 30-2147483647 seconds} Set dhcp server ip lease time

¾dhcp dns add {1~4} {ip address}

Set dhcp server dns ip address, it allows maximum 4 dns setting.

¾dhcp dns delete {1~4/all}

Remove dhcp server dns ip address setting.

Note: if NAT is enabled, the following DHCP command can bet set

¾dhcp ip-pool add {start IP} {end ip} Set dhcp server ip pool range

Example:

CM> dhcp ip-pool add 192.168.100.2 192.168.100.4

CM>show dhcp

TFTP Server IP address : 172.19.89.19

Cable Modem IP address : 10.71.135.99

Configuration file : DEF001.cfg

Lease time : 86400 (secs)

UTC time offset : -28800 (secs)

SystemLog Server IP address : 172.19.89.19

Router IP address : 10.71.128.1

SubnetMask : 255.255.240.0

User’ Guide

45

Page 45
Image 45
Orion 2000 manual CMtftp server, ¾ dhcp dns delete 1~4/all, CM dhcp ip-pool add 192.168.100.2 CMshow dhcp