Submit | Orion 2000 specification

•Listing of key Chain 2

•Input key Index ID, Key String, Start time, and End time

Submit

•Click “Submit” to change displayed parameters

Reset

•Click “Reset” to use displayed parameters, cable modem will reset.

User’ Guide

77

Image 77

Orion 2000 manual Submit

Contents

Orion Contents Mode of Operation Docsis Configuration File Vsif TAG Support Contact Your Local Cable Operator Understand the Cable Modem’s FeaturesBefore You Begin Gather Supplied and Required Items Prepare Your Area for Cable Modem InstallationSupplied Not Supplied Installing the Software Drivers Before Hardware Connection Installing the Cable Modem Using the USB PortPage Page Installing the Hardware Installing the Software Drivers User’ Guide User’ Guide Page Page Page User’ Guide Page Page User’ Guide Page Page Page User’ Guide None of the LEDs is on when I power on the LAN Cable Modem Troubleshooting the USB Installation Select USB Composite Device and click Remove Click Refresh Uninstalling the USB Driver Installing the Modem Using the Ethernet Port Enet LED on my cable modem is not lit Troubleshooting the Ethernet InstallationNone of the LEDs are on when I power on the Cable Modem Cable Modem LEDs and Connectors LEDs on the Front of the Modem Connectors on the Back of the ModemPage Getting Help Telnet commands CMshow ? CMshow interTab CMshow interface Redisplaying a command Debug Ping Image Password CMshow dhcp ¾ show dhcp¾ show version CMshow version CMshow interface ? ¾ show interface¾ show interface ethernet CMshow interface ethernet CMshow interface usb CMshow running-configuration¾ show interface usb Qpsk ¾ show downstream Display downstream information ¾ show cpe-info Display CPE information CMshow nat config ¾ show nat configCMshow downstream ¾ show upstream ¾ show access-list CMshow nat timer¾ show nat time ¾ show user ¾ show pppoe-forwarding Display PPPoE enable or disable CMshow access-list¾ nvram factory-default ¾ show cpe-limit CM dhcp ip-pool add 192.168.100.2 CMshow dhcp CMtftp server¾ dhcp dns delete 1~4/all ¾ dhcp gateway ip address Set Dhcp gateway ip address ¾ dhcp ip-pool delete 1-20/all CMnat static ipmapping add 68.5.203.16 One to one mapping ¾ nat static ipmapping delete index/all Port forwarding setting CMnat static ip enable CMnat static ip disableCMnat static portmapping delete NAT static ip Interfaces ¾ interface cable startup ¾ interface ethernet startup ¾ rip version 1/2/2b ¾ rip timer expire second Set routing entry expire time CMrip key-chain 1 10 start-time 2002-4-20 ¾ rip default CMaccess-list 41 permit 00d0.5921.3354 ffff.ffff.ffff Web-access ¾ pppoe-forwarding enabledisable Optional ¾ access-list delete list IDallCMcopy tftpconfig 68.5.203.15 4ips.txt ¾ reset ¾ quit Disconnect telnet Bridge mode Mode of OperationNAT mode ¾ ip nat enable ¾ ip route enable Routing mode ¾ ip natroute enable NAT/Routing mode User’ Guide Web User Interface Accessing the Web User InterfaceWeb User Interface Home Cable Modem Information Cable Modem Status Downstream Upstream Upstream Burst Operation Parameters Event Log Bridge Mode NAT/Router configuration Reset NAT Mode Gateway LAN InterfaceWAN Interface Submit Router Mode Routing Protocol LAN Interface Delete Key ChainAdd Submit NAT Router Mode Routing Protocol Gateway LAN Interface Authentication mode Authentication Key Chain Submit Gateway LAN Setup Page Meaning Docsis configuration file Vsif tag support