Orion 2000 Mode of Operation, Bridge mode, NAT mode, ¾ ip nat enable, Telnet commands, CMreset

6. Mode of Operation

Bridge mode

Bridge mode is the factory default setting.

NAT mode

¾ip nat enable

Enable NAT will also enable DHCP server on NAT-private subnet automatically.

Example:

‰NAT-Private subnet 192.168.100.0/24 (default is 192.168.100.0/27)

•(253) Dynamic Private IPs 192.168.100.2~192.168.100.254

•Gateway IP address 192.168.100.1

•Dynamic public WAN IP address from Head-end DHCP server

Telnet commands:

CM>interface ethernet address 192.168.100.1 mask 255.255.255.0 nat-private CM>ip nat enable

CM>reset

User’ Guide 57