Orion 2000 manual Installing the Hardware

6.Click “Finish”. You will see below screen, and then select ‘Yes.’ Now you can connect the USB cable to the PC by following next section instructions.

Installing the Hardware

This section explains how to connect the cable modem to the computer, wall outlet, and electrical outlet.

To install the hardware:

1.Power off the computer

2.Connect one end of the coaxial cable to the cable modem’s cable connector. Connect the other end of the coaxial cable to the cable wall outlet. Be sure not to bend or over tighten the cables as this may strain the connector and cause damage. If you plan to connect the cable modem and television to the same wall outlet, you must use a cable line splitter (not included).

3.Connect one end of the USB cable to the cable modem’s USB port and the other end of the cable to the USB port on the PC.

4.Plug the cable modem’s power adapter into the cable modem’s power jack and into a wall outlet

User’ Guide 10