Integrated Peripherals

This page sets up some parameters for peripheral devices connected to the system.

CMOS Setup Utility - Copyright (C) 1985-2010, American Megatrends, Inc.

Integrated Peripherals

 

 

 

 

 

 

Item Help

 

 

 

 

 

 

 

 

 

 

 

 

 

Onboard SATA Controller

Enabled

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Onboard SATA Mode

 

AHCI

 

Options

 

 

 

 

Onboard USB Controller

Enabled

 

Enabled

 

 

 

 

Legacy USB Support

 

Enabled

 

Disabled

 

 

 

 

USB Storage Emulation

Auto

 

 

 

 

 

 

Onboard Graphics Controller

Enabled

 

 

 

 

 

 

Onboard Audio Controller

Enabled

 

 

 

 

 

 

Onboard LAN Controller

Enabled

 

 

 

 

 

 

Onboard LAN Option ROM

Disabled

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

↑↓→←Move

EnterSelect

+/-/Value

F10Save & Exit Setup

 

 

 

 

F1General Help

F9Load Default Settings

EscExit Without Saving

 

 

 

 

 

 

 

 

 

 

 

OnBoard SATA Mode (AHCI)

Use this item to select the onboard SATA mode.

OnBoard SATA Controller (Enabled)

This item allows you to enable or disable the onboard SATA controller.

OnBoard USB Controller (Enabled)

Use this item to enable or disable the use of USB controller.

Legacy USB Support (Enabled)

Use this item to enable or disable support for legacy USB devices. Setting to Auto allows the system to detect the presence of USB device at startup. If detected, the USB controller legacy mode is enabled. If no USB device is detected, the legacy USB support is disabled.

USB Storage Emulation (Auto)

If Auto, USB device equal or less than 2GB will be emulated as Floppy and remaining as hard drive. Forced FDD option can be used to force a HDD formatted drive to boot as FDD (Ex.ZIP drive).

Onboard Graphics Controller (Enabled)

This item enables or disables the onboard graphics controller.

Onboard Audio Controller (Enabled)

This item enables or disables the onboard audio controller.

Onboard LAN Controller (Enabled)

Use this item to enable or disable the Onboard LAN.

Onboard LAN Option ROM (Disabled)

This item enables or disables the onboard LAN option ROM function.

Press <Esc> to return to the main menu setting page.

29

Page 35
Image 35
Packard Bell M5801 manual Integrated Peripherals