Connecting Case Components
After you have installed the motherboard into a case, you can begin connecting the motherboard components. Refer to the following:
1 Connect the CPU cooling fan cable to CPU_FAN.
2 Connect the standard power supply connector to ATX1
3Connect the auxiliary case power supply connector to ATX_12V.
4Connect the case switches and indicator LEDs to the F_PANEL.
5Connect the system cooling fan connector to SYS_FAN.
Connecting 24-pin power cable
Users please note that when installing 24- pin power cable, the latche of power cable
falls on the left side of the ATX_POWER1connector latch, just as the picture shows.
85
