Checkpoint

Description

39

Initializes DMAC-1 & DMAC-2.

 

 

3A

Initialize RTC date/time.

 

 

 

3B

Test for total memory installed in the system. Also, Check for DEL or ESC

 

keys to limit memory test. Display total memory in the system.

 

 

3C

Mid POST initialization of chipset registers.

 

 

 

40

Detect different devices (Parallel ports, serial ports, and coprocessor in CPU, …

 

 

etc.) successfully installed in the system and update the BDA, EBDA…etc.

 

 

52

Updates CMOS memory size from memory found in memory test. Allocates

 

memory for Extended BIOS Data Area from base memory. Programming the

 

memory hole or any kind of implementation that needs an adjustment in system

 

RAM size if needed.

60

Initializes NUM-LOCK status and programs the KBD typematic rate.

 

 

 

75

Initialize Int-13 and prepare for IPL detection.

 

 

78

Initializes IPL devices controlled by BIOS and option ROMs.

 

 

7C

Generate and write contents of ESCD in NVRam.

 

 

84

Log errors encountered during POST.

 

 

85

Display errors to the user and gets the user response for error.

 

 

 

87

Execute BIOS setup if needed / requested. Check boot password if

 

 

installed.

 

 

8C

Late POST initialization of chipset registers.

 

 

 

8D

Build ACPI tables (if ACPI is supported)

 

 

 

8E

Program the peripheral parameters. Enable/Disable NMI as selected

 

 

 

90

Initialize system management interrupt by invoking all handlers.

 

Please note this checkpoint comes right after checkpoint 20h

 

 

A1

Clean-up work needed before booting to OS.

 

 

73

Page 79
Image 79
Packard Bell M5801 manual Initializes DMAC-1 & DMAC-2