Messaging - Callback
To leave a message waiting indication on a telephone when you hear busy or ringback tone:
zPress Leave A Msg command key.
To respond to a message waiting condition on your telephone:
Do one of the following:
zPress Messaging followed by Call.
zLift the handset, and then press Messaging.
A call is placed to the message sender (voice mail system or extension user) that left the oldest message.
To read messages before responding:
1.Press the Messaging command key.
2.If a password is required, enter your password and press the Enter command key.
3.Press the Read Message command key.
4.Press the Call Me Back command key.
5.Do one of the following:
To call the message sender, press the Call command key.
To delete the message, press the Erase Msg Call command key.
To view the next message, press the Next Msg command key.
To check for messages from a remote extension:
1.Press the Messaging command key.
2.Press the Remote Msgs command key.
3.Dial your extension number.
4.Press the Enter command key.
5.If a password is required, enter your password and press the Enter command key.
6.Press the Read Message command key.
