To remove the external microphone, etc., from the audio input terminals 1, 2 (XLR 3 pin)
Remove while pushing on the PUSH section of the audio |
|
input terminals 1, 2 (XLR 3 pin). | ヱヶヴラ |
|
≥Set the input signal to
CH1, CH2 switches to INT (L) or INT (R) after removing the external microphone. Audio will not be recorded when motion picture is recorded without switching.
A PUSH section
≥Set INPUT1, 2 (+48V) switches to OFF if you connect
equipment not compatible with +48 V. You can damage this unit or such equipment if you leave the setting at ON.
≥This unit is turned off when a problem occurs with the +48 V power supply.
≥The battery will discharge faster if you use a phantom microphone.
≥When inputting the external microphone signal to audio channels 1 and 2, connect the external microphone to audio input terminal 2 (XLR 3 pin) and switch both CH1 and CH2 switches to INPUT2.
- 48 -
