- 61 -
Quick Start
1Press and hold down the QUICK START
button until the display on the LCD monitor/
viewfinder disappears.
The quick start lamp E flashes green and the unit goes into
Quick Start Standby Mode.
2Press the QUICK START button.
The quick start lamp E goes off and the unit is put into
recording pause about 0.6 seconds.
≥When in Quick Start Standby Mode about 80% of the power used in recording pause mode
is being consumed, so the recording time will be re duced.
≥This unit is turned off after approximately 30 minutes elapse i n Quick Start Standby Mode.
≥Quick Start Standby Mode is cleared when the mode switch is set to .
≥Depending on the recording conditions and menu settings, time for Quick Start may be longer
than 0.6 seconds.
≥It may take some time for Automatic White Balance to adjust.
≥In the Quick Start Mode, the zoom magnification becomes approximately 1k.
Recording
Useful functions
ZEBRA
BARS
DISP/MODE CHK
QUICK START
ADISP/MODE CHK button
BZEBRA button
CQUICK START button
DBARS button
AG-AC90-VQT4M99_mst.book 61 ページ 2012年9月25日 火曜日 午後12時6分